...
Girder: Specify the girder on which the transverse stiffener will be generated.
Skew Angle: The skew angle for a stiffener defines the orientation of the stiffener relative to the main structural axis.Positive Skew Angle: A positive value (e.g., 15°) will rotate the stiffener in a clockwise direction relative to the reference axis. Negative Skew Angle: A negative value (e.g., -15°) will rotate the stiffener in a counterclockwise direction relative to the reference axis.
Station [Start/End]: Users can specify the station of the stiffener either by selecting the Start/End options or by entering a station manually.
...
Distance from Bottom of Web: The bottom of the stiffener can be offset from the bottom of the web using this parameter.
...
3D Detailing
Top-Outer Chamfer: For the top side of the stiffener, the chamfer value for the edge farthest from the web can be specified.
Top-Inner Chamfer: For the top side of the stiffener, the chamfer value for the edge closer to the web can be specified.
Bottom-Outer Chamfer: For the bottom side of the stiffener, the chamfer value for the edge farthest from the web can be specified.
Bottom-Inner Chamfer: For the bottom side of the stiffener, the chamfer value for the edge closer to the web can be specified.
...