Bearing
...
Load
Result CaseStage: Specify the result extraction case from stage at which the bearing reaction forces load will be obtainedapplied.
Insertion Point:Specify the Select an insertion point utilized for defining the bearings.
Envelope [NO/Fx/My]:
Min/Max [Abs. max/Max/Min]: Maximum represents positive values, minimum represents negative values, and absolute maximum refers to the largest value in magnitude, whether positive or negative.
Fx: Read-only value for the reaction force of the bearing along the X-axis.
Fy: Read-only value for the reaction force of the bearing along the Y-axis.
Fz: Read-only value for the reaction force of the bearing along the Z-axis.
Bearing Load
Stage:
Insertion Point:to define the location of the loads.
Fx: Specify the force applied in the X-axis direction.
Fy: Specify the force applied in the Y-axis direction.
Fz: Specify the force applied in the Z-axis direction.
Mx: Specify the moment applied around the X-axis.
My: Specify the moment applied around the Y-axis.
Mz: Specify the moment applied around the Z-axis.
| Info |
|---|
Loads are applied according to Bearings Local Axis: The loads defined using the Bearing Load object are applied based on the bearing's local axis, which aligns with the global (alignment) coordinate system if the parameter "Bearing Rotation" under Superstructure-FEA Bearings is defined as zero. Otherwise, the loads will be applied based on the rotated axis.
|
