Versions Compared

Version Old Version 34 New Version 35
Changes made by

Umut Nuhat Sevinc

Melis Ceylan

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Info

After clicking on 'Substructure> Pile' in the navigation treeview, follow the steps to define the Pile. You can use the collapsed documentation page below for more information on the explanations of each parameter.

Expand
titlePile
Single Pile [SIG]

1

🖱️ Click the three-dots icon on the Substructure cell, and then select Footing1.

2

As a result of these operations, an issue will appear on the OpenBrIM screen. This does not necessarily mean that any operation was done incorrectly. The issue will be resolved when the Section and Pile Properites are set in the next step.

3

Insert excerpt
_Quick Tips
_Quick Tips
nameIssue
nopaneltrue

4

🖱️ Click three-dots icon on the Section Data cell and click Edit.

5

🖱️Enter the Section Length as 50.

6

🖱️ Click three-dots icon on Start Section cell and select a Section as PileCircle.

If you have reached this stage and you don't have a section to select, and if you want to use the Import Button, you can refer to the Quick Tip.

7

Insert excerpt
_Quick Tips
_Quick Tips
nameImportMaterial
nopaneltrue

8

🖱️ Click three-dots icon on End Section cell and select a Section as PileCircle.

If you have reached this stage and you don't have a section to select, and if you want to use the Import Button, you can refer to the Quick Tip.

9

Insert excerpt
_Quick Tips
_Quick Tips
nameImportSection
nopaneltrue

10

🖱️Enter the Longitudinal Offset as 5.

11

Insert excerpt
_Quick Tips
_Quick Tips
nameLongitudinalOffsetDefinition
nopaneltrue

12

🖱️Enter the Transverse Offset as 10.

13

Insert excerpt
_Quick Tips
_Quick Tips
nameTransverseOffsetDefinition
nopaneltrue

14

🖱️Enter the Section Orientation as 30.

15

🖱️ Keep the Ground Elevation, Batter Angle(Long.), Batter Angle(Trans.) and Pile Embedment as default.

16

You can edit the FE mesh settings of girders from FEA tab. 🖱️ Click three-dots icon on the Pile Properties cell and click Edit.

17

🖱️Enter the Offset from the bottom of the footing/bent as 3.

🖱️ Enter Keep the Tx and Ty as 20.🖱️ Keep the,Ty,Tz, Rx, Ry and Rz as default.

18

🖱️ To model all the pile property, copy the data below and paste the parameters into the first cell in OpenBrIM spreadsheet.

Image Removed

image-20240928-073133.pngImage Added

19

🖱️Enter the Pile Capacity as 360.

20

🖱️ Keep the Top Connection and Generate FEM as default.

21

🖱️ Set name as Pile2.

22

When the steps are completed, the shared screenshot displayed in the adjacent cell should be visible in the 3D view of OpenBrIM.

23

To model all the pile, copy the data below and paste the parameters into the first cell in OpenBrIM spreadsheet. Refer to the quick tip for an easy guide on how to perform the copy operation. After completing the copy, proceed to the next step to verify the model.

...

Anchor
PileProperty
PileProperty

FEA Tab-Soil Springs (Linear)-Pile Property

Pile Property

Code Block
3.0000	20.0000	20.0000Free	Free	Free	Free	Free	Free
6.0000	20.0000	20.0000Free	Free	Free	Free	Free	Free
9.0000	20.0000	20.0000Free	Free	Free	Free	Free	Free
12.0000	20.0000	20.0000Free	Free	Free	Free	Free	Free
15.0000	20.0000	20.0000Free	Free	Free	Free	Free	Free
18.0000	20.0000	20.0000Free	Free	Free	Free	Free	Free
21.0000	20.0000	20.0000Free	Free	Free	Free	Free	Free
24.0000	20.0000	20.0000Free	Free	Free	Free	Free	Free
27.0000	20.0000	20.0000Free	Free	Free	Free	Free	Free
30.0000	20.0000	20.0000Free	Free	Free	Free	Free	Free
33.0000	20.0000	20.0000Free	Free	Free	Free	Free	Free
36.0000	20.0000	20.0000Free	Free	Free	Free	Free	Free
39.0000	20.0000	20.0000Free	Free	Free	Free	Free	Free
42.0000	20.0000	20.0000Free	Free	Free	Free	Free	Free
45.0000	20.0000	20.0000Free	Free	Free	Free	Free	Free
48.0000	20.0000	20.0000	100.0000	Free	Free	FreeFixed	Fixed	Fixed	Fixed	Fixed	Fixed

General Tab-Pile

Pile

Code Block
Pile2	Footing1	[[600, PileCircle, PileCircle]]	5.0000	10.0000	30	0.0000	0.0000	0.0000	3.0000
Pile3	Footing1	[[600, PileCircle, PileCircle]]	5.0000	0.0000	30	0.0000	0.0000	0.0000	3.0000
Pile4	Footing1	[[600, PileCircle, PileCircle]]	5.0000	-10.0000	30	0.0000	0.0000	0.0000	3.0000
Pile7	Footing1	[[600, PileCircle, PileCircle]]	-5.0000	10.0000	30	0.0000	0.0000	0.0000	3.0000
Pile8	Footing1	[[600, PileCircle, PileCircle]]	-5.0000	0.0000	30	0.0000	0.0000	0.0000	3.0000
Pile9	Footing1	[[600, PileCircle, PileCircle]]	-5.0000	-10.0000	30	0.0000	0.0000	0.0000	3.0000
Pile11	Footing1	[[600, PileCircle, PileCircle]]	0.0000	16.5000	30	0.0000	0.0000	0.0000	3.0000
Pile12	Footing1	[[600, PileCircle, PileCircle]]	0.0000	5.5000	30	0.0000	0.0000	0.0000	3.0000
Pile13	Footing1	[[600, PileCircle, PileCircle]]	0.0000	-5.5000	30	0.0000	0.0000	0.0000	3.0000
Pile14	Footing1	[[600, PileCircle, PileCircle]]	0.0000	-16.5000	30	0.0000	0.0000	0.0000	3.0000
Pile16	Footing2	[[600, PileCircle, PileCircle]]	5.0000	10.0000	30	0.0000	0.0000	0.0000	3.0000
Pile17	Footing2	[[600, PileCircle, PileCircle]]	5.0000	0.0000	30	0.0000	0.0000	0.0000	3.0000
Pile18	Footing2	[[600, PileCircle, PileCircle]]	5.0000	-10.0000	30	0.0000	0.0000	0.0000	3.0000
Pile21	Footing2	[[600, PileCircle, PileCircle]]	-5.0000	10.0000	30	0.0000	0.0000	0.0000	3.0000
Pile22	Footing2	[[600, PileCircle, PileCircle]]	-5.0000	0.0000	30	0.0000	0.0000	0.0000	3.0000
Pile23	Footing2	[[600, PileCircle, PileCircle]]	-5.0000	-10.0000	30	0.0000	0.0000	0.0000	3.0000
Pile25	Footing2	[[600, PileCircle, PileCircle]]	0.0000	16.5000	30	0.0000	0.0000	0.0000	3.0000
Pile26	Footing2	[[600, PileCircle, PileCircle]]	0.0000	5.5000	30	0.0000	0.0000	0.0000	3.0000
Pile27	Footing2	[[600, PileCircle, PileCircle]]	0.0000	-5.5000	30	0.0000	0.0000	0.0000	3.0000
Pile28	Footing2	[[600, PileCircle, PileCircle]]	0.0000	-16.5000	30	0.0000	0.0000	0.0000	3.0000

...