Versions Compared

Version Old Version 8 New Version 9
Changes made by

mert.goktas

Melis Ceylan

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Excerpt
nameShearStud

The Shear Stud has no impact on Shear Studs does not directly affect the finite element model and is used only used for design and 3D visualization purposes. To display bolts on the 3D view, the detailing option must be turned on with show studs=yes. However, enabling this option increases the triangulation number, leading to slower performance. To reduce compile time, disabling the detailing option can be helpful.

Position

Girder: Choose the plate girder

Start Station-End Station [ft]: The station is located along the PGL. If the shear stud parameters, such as diameter, number of studs per row, spacing of studs in row, and spacing between rows, are the same between two stations, those stations can be used as the start and end stations.

Shear Stud

Diameter [in]:,Shear Stud In-Place Height [in]:,Shear Stud Head Thickness [in]:,No. Of Studs Per Row:,Spacing of Studs In Row [in]:,Spacing Between Rows [in]:,Number of Segments Used to Draw the Bolt:,Show Studs (Detailing) parameters can be defined for shear stud modeling purposes. Shear studs are only visible if the 'Show Studs (Detailing):' parameter is set to 'YES'; otherwise, the shear stud model will not be visible to the user.