| Info |
|---|
After clicking on 'Reports> Quantity Takeoff' in the navigation treeview, follow the steps to define the Quantity Takeoff. You can use the collapsed documentation page below for more information on the explanations of each parameter. |
| Expand | ||
|---|---|---|
| ||
| Quantity Takeoff [SIG] |
| 1 | 🖱️ Click the three-dots icon on the Bridge cell, and then set BRG1. |  | ||||||||||
| 2 | 🖱️ Keep the Girder Steel Price, Girder Concrete Price, Deck Concrete Price, Substructure Concrete Price, Barrier Concrete Price, Bolt Price and Stud Price as default. |  | ||||||||||
| 3 | After the Quantity Takeoff object is defined, it can be reviewed in the Document section before the analysis and design process. For detailed information, you can refer to the Quick Tip below. | |||||||||||
| 4 |
| |||||||||||
| 5 | 🖱️ Click Quantity Takeoff Document icon. |  | ||||||||||
| 6 | 🖱️ Switch between the Quantity Takeoff tree view and review the tables. |  | ||||||||||
| 7 | Proceed to the next step to verify the model. | |||||||||||
| Anchor | ||||
|---|---|---|---|---|
|
| Tip |
|---|
The completed quantity takeoff is illustrated below. Please verify that you have the same model on your end by examining each view provided here. For more information on how to perform visual checks, refer to the quick tips. |
| Tip |
|---|
To view the entire procedure explained on this page, please watch the recorded Video below. |