Versions Compared

Version Old Version 19 New Version 20
Changes made by

Umut Nuhat Sevinc

Umut Nuhat Sevinc

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Expand
titleShear Stud
Shear Stud [SIG]
1

(blue star) 🖱️ Click the three-dots icon on the Girder cell, and then set G4.

2

(blue star)🖱️Enter the Start Station as 1.975.

3

(blue star)🖱️Enter the End Station as 73.

4

Start and End Station parameters of the Shear Stud should take into account skew angle.
You can refer to the Quick Tip below to review the calculations.

5

Insert excerpt
_Quick Tips
_Quick Tips
nameStationCalculateforSkewAngle
nopaneltrue

6

You can edit the dimensions of Shear Stud from Shear Stud tab.
(blue star) 🖱️ Keep the Diameter, Shear Stud In-Place Height, Shear Stud Head Thickness, Number of Segments Used to Draw the Bolt and Show Studs as default.

(blue star)🖱️Enter the No. of Studs per Row as 3.
(blue star)🖱️Enter the Spacing of Studs in Row as 4.
(blue star)🖱️Enter the Spacing between Rows as 6.

7

 You can enable/disable display the detailing of shear studs by editing Show Studs as in splice spreadsheet.

8

When the steps are completed, the shared screenshot displayed in the adjacent cell should be visible in the 3D view of OpenBrIM.

9

To model all the shear studs, copy the data below and paste the parameters into the first cell in OpenBrIM spreadsheet. Refer to the quick tip for an easy guide on how to perform the copy operation. After completing the copy, proceed to the next step to verify the model.

...