Versions Compared

Version Old Version 14 New Version 15
Changes made by

Umut Nuhat Sevinc

Umut Nuhat Sevinc

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Expand
titleF Shape Barrier
F Shape Barrier [SIG]
1

(blue star) 🖱️ Click the three-dots icon on the Deck cell, and then set Deck1.

2

As a result of these operations, an issue will appear on the OpenBrIM screen. This does not necessarily mean that any operation was done incorrectly. The issue will be resolved when the Material is set in the next step.

3

Insert excerpt
_Quick Tips
_Quick Tips
nameIssue
nopaneltrue

4

(blue star) 🖱️ Set name as BR2.

5

(blue star) 🖱️ Keep the Orientation as default.

6

(blue star) 🖱️ Click the three-dots icon on the Material cell, and then select FcCube_NoStiffness.

 

If you have reached this stage and you don't have a material to select, and if you want to use the Import Button, you can refer to the Quick Tip.

7

Insert excerpt
_Quick Tips
_Quick Tips
nameImportMaterial
nopaneltrue

8

Insert excerpt
_Quick Tips
_Quick Tips
nameNoStiffnessMaterial
nopaneltrue

9

(blue star)🖱️Enter the Start Transverse Location and End Transverse Location as -243.

10

(blue star) 🖱️ Keep the Dimensions parameters as default.

11

When the steps are completed, the shared screenshot displayed in the adjacent cell should be visible in the 3D view of OpenBrIM.

12

To model all the f shape barrier, copy the data below and paste the parameters into the first cell in OpenBrIM spreadsheet. Refer to the quick tip for an easy guide on how to perform the copy operation. After completing the copy, proceed to the next step to verify the model.

...