| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
Follow the next steps to create shear stud code check (AASHTO). |
...
| Info |
|---|
After clicking on ‘Superstructure Code Checks> Shear Stud Code Check (AASHTO)' in the navigation treeview, follow the steps to define the Shear Stud Code Check. You can use the collapsed documentation page below for more information on the explanations of each parameter. |
| Expand | ||
|---|---|---|
| ||
| Shear Stud Code Check (AASHTO) [SIG] |
| 1 |
|
Name the rows as SStudCC, respectively.
Select Code Check Template as SStudCCT.
Change Check every nth station to 30 ft.
 |
| 2 |
Under General column, select Girder and Set to G4.
...
Shear Stud Code Check (AASHTO)
General
As a result of these operations, an issue will appear on the OpenBrIM screen. This does not necessarily mean that any operation was done incorrectly. The issue will be resolved when the code check template is define in the next step. |  | |||||||||||
| 3 |
| |||||||||||
| 4 |
|  | ||||||||||
| 5 |
|  | ||||||||||
| 6 |
| |||||||||||
| Tip |
|---|
Shear stud code check (AASHTO) is completed. |
...
Go to Shear Stud Code Check (AASHTO) under Superstructure Code Checks on the tree view.
...
Copy General from model inputs and paste into OpenBrIM.
...
   | ||
| 7 |
|  |
| 8 | Proceed to the next step to verify the model. | |
| Anchor | ||||
|---|---|---|---|---|
|
| Tip |
|---|
The completed shear stud code check is illustrated below. Please verify that you have the same model on your end by examining each view provided here. For more information on how to perform visual checks, refer to the quick tips. |
...
| Tip |
|---|
To view the entire procedure explained on this page, please watch the recorded Video below. |
...