...
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
Follow the next steps to define construction of substructure bridge components. |
...
| Info |
|---|
After clicking on ‘Construction> Substructure Construction> Foundation Construction' in the navigation treeview, follow the steps to define the Foundation Construction. You can use the collapsed documentation page below for more information on the explanations of each parameter. |
| Expand | ||
|---|---|---|
| ||
| Foundation Construction (Complete) |
...
| [SIG] |
| 1 |
|
Pick Foundation.
Click on all the foundations.
Click Done.
Set Self Weight Factor to 1.
| ||||||
| 2 | As a result of these operations, an issue will appear on the OpenBrIM screen. This does not necessarily mean that any operation was done incorrectly. The issue will be resolved when the foundation are define in the next step. |  | ||||
| 3 |
| |||||
...
| |||||
...
| ||||
...
| |||||
Go to Foundation Construction (Complete) under Substructure on the tree view.
Copy Foundation Construction from model inputs and paste into OpenBrIM.
...
Foundation (Complete)
Foundation Construction
| 4 |
|    |
| 5 |
|  |
| 6 | Proceed to the next step to verify the model. | |
| Anchor | ||||
|---|---|---|---|---|
|
| Tip |
|---|
The completed foundation construction is illustrated below. Please verify that you have the same model on your end by examining each view provided here. For more information on how to perform visual checks, refer to the quick tips. |
...
| Tip |
|---|
To view the entire procedure explained on this page, please watch the recorded Video below. |
...