...
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
Follow the next steps to define construction of superstructure bridge components. |
...
Go to Superstructure Attachment Elements and click on Pick.
...
...
Pick the barrier objects from 3D view. Then, click done after selection completed.
...
| Info |
|---|
After clicking on ‘Construction> Superstructure Construction> Superstructure Attachment Construction' in the navigation treeview, follow the steps to define the Superstructure Attachment Construction. You can use the collapsed documentation page below for more information on the explanations of each parameter. |
| Expand | ||
|---|---|---|
| ||
| Superstructure Attachment Construction [SIG] |
| 1 |
|    | ||||
| 2 | As a result of these operations, an issue will appear on the OpenBrIM screen. This does not necessarily mean that any operation was done incorrectly. The issue will be resolved when the superstructure attachments are define in the next step. |  | ||||
| 3 |
| |||||
...
| |||||
...
| ||||
...
| |||||
Go to Superstructure Attachment Construction under Superstructure on the tree view.
Copy General from model inputs and paste into OpenBrIM.
...
Superstructure Attachment Construction
General
| 4 |
|    |
| 5 |
|  |
| 6 |
|  |
| 7 |
|  |
| 8 | Proceed to the next step to verify the model. | |
| Anchor | ||||
|---|---|---|---|---|
|
| Tip |
|---|
The completed superstructure attachment construction is illustrated below. Please verify that you have the same model on your end by examining each view provided here. For more information on how to perform visual checks, refer to the quick tips. |
...
| Tip |
|---|
To view the entire procedure explained on this page, please watch the recorded Video below. |
...