...
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
Follow the next steps to define construction of substructure bridge components. |
...
Proceed with Pier Column Construction.
...
Select a Stage as SubstrConstStage.
...
Pick Columns.
...
...
Click on all the columns.
...
Click Done.
...
Set Self Weight Factor to 1.
...
Go to Pier Column Construction under Substructure Construction on the tree view.
...
Copy Column Construction from model inputs and paste into OpenBrIM.
...
Pier Column
Pier Column Construction
...
| Info |
|---|
After clicking on ‘Construction> Substructure Construction> Pier Column Construction' in the navigation treeview, follow the steps to define the Pier Column Construction. You can use the collapsed documentation page below for more information on the explanations of each parameter. |
| Expand | ||
|---|---|---|
| ||
| Pier Column Construction [SIG] |
| 1 |
| 
| ||||||||||
| 2 | As a result of these operations, an issue will appear on the OpenBrIM screen. This does not necessarily mean that any operation was done incorrectly. The issue will be resolved when the pier columns are define in the next step. |  | ||||||||||
| 3 |
| |||||||||||
| 4 |
| 
| ||||||||||
| 5 |
|  | ||||||||||
| 6 | Proceed to the next step to verify the model. | |||||||||||
| Anchor | ||||
|---|---|---|---|---|
|
| Tip |
|---|
The completed pier column construction is illustrated below. Please verify that you have the same model on your end by examining each view provided here. For more information on how to perform visual checks, refer to the quick tips. |
...
| Tip |
|---|
To view the entire procedure explained on this page, please watch the recorded Video below. |
...