Versions Compared

Version Old Version 17 New Version 18
Changes made by

Umut Nuhat Sevinc

Umut Nuhat Sevinc

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Info

Follow the next steps to define transverse stiffener.

...

Go to Transverse Stiffener.

...

 

...

Enter the Station, Side of Web and Material.

...

Go to Dimensions tab to edit the stiffener inputs.

...

...

Go to 3D Detailing tab to edit the stiffener 3D Detailing inputs.

...

 

...

Go to FEM tab to enable/disable Stiffener FEM.

...

...

Expand
titleQuick Tip

Do not forget to assign the related material for each case.

Follow the below steps to copy and paste all inputs from our data set.

...

Go to Transverse Stiffener under Stiffeners on the tree view.

...

Tip

Completed transverse stiffener is illustrated below.

...

Info

After clicking on 'Superstructure> Stiffeners> Transverse Stiffener' in the navigation treeview, follow the steps to define the Transverse Stiffener. You can use the collapsed documentation page below for more information on the explanations of each parameter.

Expand
titleTransverse Stiffener
Transverse Stiffener [SIG]

(blue star) Click the three-dots icon on the Girder cell, and then set G4.

Image Added

(blue star)Enter the Station as 130.2414.

Image Added

(blue star) Keep the Side of Web as default.

(blue star) Click three-dots icon on Material cells and select a Material as A709 50W.

If you have reached this stage and you don't have a material to select, and if you want to use the Import Button, you can refer to the Quick Tip.

Image AddedImage AddedImage Added

Insert excerpt
_Quick Tips
_Quick Tips
nameImportMaterial
nopaneltrue

(blue star) Keep the Dimension, 3D Detailing and FEM as default.

Image AddedImage AddedImage Added

When the steps are completed, the shared screenshot displayed in the adjacent cell should be visible in the 3D view of OpenBrIM.

Image Added

To model all the Transverse Stiffener, copy the data below and paste the parameters into the first cell in OpenBrIM spreadsheet. Refer to the quick tip for an easy guide on how to perform the copy operation. After completing the copy, proceed to the next step to verify the model.

Insert excerpt
_Quick Tips
_Quick Tips
nameCopyPasteInputs
nopaneltrue

Transverse Stiffener

General

Code Block
STFT1	G4	130.2414	Both	A709_50W
STFT3	G4	90.2414	Both	A709_50W

Anchor

...

3D Detailing

Code Block
STFT1	3.5000	2.5000
STFT3	3.5000	2.5000

 

FEM

Code Block
STFT1	NO
STFT3	NO

...

Photo

Code Block
STFT1	1.0000	12.0000	0.0000	0.0000
STFT3	1.0000	12.0000	0.0000	0.0000

 

Photo

Insert excerpt
_Quick Tips
_Quick Tips
nameModelButton
nopaneltrue

...

Tip

To view the entire procedure explained on this page, please watch the recorded Video below.