...
...
Go to Bolt Property under Connections on the tree view.
...
Copy Geometric Properties, and Mechanical Properties from model inputs and paste into OpenBrIM.
...
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
Follow the next After clicking on 'Properties> Bolt Property' in the navigation treeview, follow the steps to define the bolt properties of the web and flange splice bolts. |
...
Go to Properties / Bolt Property on tree view.
...
...
Create 3 rows (1 for flange bolts, 1 for web bolts and 1 for gusset bolts).
...
...
Enter the Geometric Properties, Mechanical Properties and Visual Settings.
Bolt Property. You can use the collapsed documentation page below for more information on the explanations of each parameter. |
| Expand | ||
|---|---|---|
| ||
| Bolt Property [SIG] |
| 1 |
|  |
| 2 |
|  |
| 3 |
| |
| 4 |
|  |
| 5 |
| |
| 6 |
|   |
| 7 | To model all the bolt property, copy the data below and paste the parameters into the first cell in OpenBrIM spreadsheet. Refer to the quick tip for an easy guide on how to perform the copy operation. After completing the copy, proceed to the next step to verify the model. | |
| Insert excerpt | ||||||||
|---|---|---|---|---|---|---|---|---|
|
Insertion Point | ||
|---|---|---|
Geometric Properties
| ||
|
| Mechanical Properties
|
Visual Settings
| Anchor | ||||
|---|---|---|---|---|
|
...
| Tip |
|---|
To view the entire procedure explained on this page, please watch the recorded Video below. |