Versions Compared

Version Old Version 5 New Version 6
Changes made by

mert.goktas

Umut Nuhat Sevinc

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Panel
panelIconIdatlassian-info
panelIcon:info:
bgColor#DEEBFF

Follow the next steps to create load rating reports.

1

Go to Load Rating/Steel I Girder Load Rating.

Image RemovedImage Added
2

Under General column, name 1st column LoadRatReport.

3

Set G4 to Girder.

4

Enter Station input.

Image RemovedImage Added
5

Set SIGLRT1 to LRTemplate.

6

Switch to Reinforcement columnSelect Panel Type as Interior Panel.

Image RemovedImage AddedImage Added
7

Enter rebar input data or keep the default valuesSelect Modular Ratio Comp. Method as EsbyEc.

8

Switch to Cover Plates.

Image RemovedImage Added
9

Enter cover plate input data or keep the default values.

10

Switch to Section Losses.

Image RemovedImage Added
11

Enter section loss input data or keep the default values.

12

Switch to Stiffener.

Image Removed

13

Specify stiffener input data.

Tip

Load rating report is completed.

...

1

Go to Steel I Girder Load Rating under Load Rating on the tree view.

2

Copy General, Reinforcement, Cover Plates , and Section Losses and Stiffener from model inputs and paste into OpenBrIM.

...

Insert excerpt
_ConfluenceInclusions
_ConfluenceInclusions
namePasteTip
nopaneltrue

Steel I girder Load Rating

General

Code Block
LoadRatReport	G4	240.0000	SIGLRT1	InteriorPanel	ShoredConstruction

Reinforcement

Code Block
LoadRatReport	A615_60	5	5	ASTMA615No5	ASTMA615No5	ASTMA615No4	ASTMA615No4	2	3	1Interior Panel	EsbyEc	N/A

Cover Plates

Code Block
LoadRatReport	0.0000	0.0000	0.0000	0.0000	0.0000	0.0000	0.0000	0.0000

Section Losses

Code Block
LoadRatReport	0.0000	0.0000	0.0000	0.0000	0.0000	0.0000	0.0000	0.0000	0	0

Stiffener

Code Block
LoadRatReport	NO	YES	Use Cross Frame Spacing	82	0.0000	0.0000