| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
Follow the next steps to create steel I girder code check (AASHTO). |
| 1 | Go to Superstructure Code Checks/Steel I Girder Code Check (AASHTO). |  |
| 2 | Under General column, select Girder as G4 (exterior girder). | |
| 3 | Specify Station as 260 ft. (around 2nd span mid). |  |
| 4 | Name the row G4Span. | |
| 5 | Enter Panel Type as InteriorPanel (Panel Type serves for web panel classification). | |
| 6 | Select Code Check Template as SuperstrCCT. |  |
| 7 | Go to 2nd row (It’s for constructability checks for girder G1 at station 240 ft). |  |
| 8 | Name the 2nd row G1SpanConst. | |
| 9 | Select Girder column G1. | |
| 10 | Enter Station as 240 ft. | |
| 11 | Enter Panel Type as InteriorPanel. | |
| 12 | Select Code Check Template as SuperstrConstCCT. | |
| 13 | Go to 3rd row (It’s for serviceability (Strength, Service and Fatigue) checks for girder G2 at station 160 ft (at pier)). |  |
| 14 | Name the 3rd row G2Support. | |
| 15 | Select Girder column G2. | |
| 16 | Enter Station as 160 ft. | |
| 17 | Enter Panel Type as EndPanel. | |
| 18 | Select Code Check Template as SuperstrCCT. | |
| 19 | Go to Deck Reinforcement tab to select Data Preference. |  |
...