Content Comparison

Panel

Follow the next steps to add F shape barriers to both sides of the bridge.

1

Go to F Shape Barrier on the tree view.

2

Click three-dots icon on Deck and select a deck.

3

Select the Orientation of the barriers on both sides.

4

Set the concrete Material of the barrier.

5

Enter Start Transverse Offset and End Transverse Offset.

6

Go to Dimensions tab.

7

Enter Height and Width.

8

Expand

title	Quick Tip

Barriers are included in the FE model to distribute the Wind Forces.

Also, by assigning a section, you can define a custom shaped barrier.

Insert excerpt

Insert excerpt

1	Go to F Shape Barrier under Superstructure Attachments on the tree view.
2	Copy F Shape Barrier, and Dimensions from model inputs and paste into OpenBrIM.

Tip
Completed F shape barrier is illustrated below.

Anchor

	ModelInputs
	ModelInputs

Insert excerpt

F Shape Barrier

F Shape Barrier

Code Block
BR2 Deck1 Left FcCube_4ksiNoStiffness -243.0000 -243.0000 BR3 Deck1 Right FcCube_4ksiNoStiffness 243.0000 243.0000

Dimensions

Code Block
BR2 35.0000 20.0000 15.0000 10.0000 0.0000 BR3 35.0000 20.0000 15.0000 10.0000 0.0000

Versions Compared