Content Comparison

1

• After logging in to your account, click on 'Project' located in the top right corner.

• Then, click on 'NEW' located in the top left corner of the screen.

2

In the opened window, click on 'Click on 'New Project' located under 'Steel Tub Girder Training Example' located under in the 'Example ProjectsProject' section of the opened window.

3

After giving a name to the project, the example project will open.

1

After the analysis and design are completed, click on 'Report' located on the top left side. Then, click on 'Detailed Report'.

2

On the left side of the opened window, you can see the list of design reports added to the project.

Image Removed

When the 'Analysis' button appears in the top left corner, click on it to start the analysis to initiate the finite element analysis (FEA) of the steel tub-girder bridge.

This project's analysis takes approximately 3.5 minutes.

2

When the analysis is completed, click on 'Close' located in the bottom right corner of the analysis screen to exit the analysis interface.

3

Click on the 'Design' button that appears in the top left corner instead of the analysis button to calculate the parametric design parameters and collect the analysis results required for the corresponding design report.