Materials
There are common The AEC | BOLT BIM Cloud library provides commonly used steel and common used concrete material definitions in AEC|BOLT BIM Cloud library. If these material definitions are not imported by using the Quick Import button that , which is explained in detail on the page found at Settings page , definitions they must be imported separately in order to be used as shown utilize them, as demonstrated below.
...
Go to the Materials section → and click “ Material DB”on "Material DB."
Select ASTM A615 Gr60 for steel and Conc 4000psi → click “import”
...
for concrete, then click on "Import."
Additionally, you have the option to include a custom material definition, as shown illustrated below.
...
Go to the Materials section → click “Add” and click on "Add."
Enter the values of for the material properties Name and provide a name for the material.
Rebars
There are rebar definitions in The AEC | BOLT BIM Cloud library contains rebar definitions. If these rebar definitions are have not been imported by using the Quick Import button that , which is explained in detail on the page found at Settings page , they are must also must be imported in order to be used. Process utilized. The process for importing rebar definitions is the same as importing of material definitions.
...
Go to Rebar section → click “Rebar DB” → select rebars → click “import”
A material must be assigned to rebars to avoid errors during analysis. Assign ASTM A615 Gr60 as shown belowTo avoid errors during analysis, it is essential to assign a material to rebars. Follow the steps below to assign ASTM A615 Gr60:
Select the rebars that need a material assignment.
Choose ASTM A615 Gr60 from the available material options.
Assign ASTM A615 Gr60 to the selected rebars.
...