...
Bolt diameter [in][0.625/0.75/0.875/1/1.1225]: Nominal diameter of the bolt used in design. The design only supports the given options for bolt diameter, and entering a different bolt diameter is not supported.
...
ASTM Standard of Bolts[LowStrengthBolt/ASTM_F3125]: The distinction between high strength and low strength bolts determines the shear resistance of each type, as well as the slip resistance of high strength bolts.
Grade of bolt material[A325/F1852/A490/F2280/A307_GradeA]: The type of material used for the bolt determines the shear resistance of low strength bolts and the minimum required bolt tension for high strength bolts.
Is Bolt Slip Critical[Yes/No]: Option to specify the mechanism by which bolt force is transferred.
Hole type[StandardHole / OversizeAndShortSlottedHole / Long Slotted Holes with Perpendicular To Force /Long Slotted Holes With Parallel To Force]: To determine the maximum allowable hole sizes, minimum spacing, and clear distances in the design.
Bolt Thread[Excluded/Included]: The type of bolt is determined by the position of threads relative to the shear plane and impacts the shear resistance of the bolt.
Surface Condition[ClassA/ClassB/ClassC/ClassD]: Related to the slip resistance of bolts. Refers to the condition of the faying surfaces, such as being unpainted and clean, blast-cleaned with a coating, galvanized, etc.