...
| 1 | Navigate to Properties > Sections |  | ||||
| 2 | To import a section, click on the three-dot icon located on the first cell of the Name and select "Import Section". | |||||
| 3 | Select OpenBrIM Bridge Objects > Basic Sections > Basic Shapes > Rectangle | 
| ||||
| 4 | Enter Width as 60 and Depth as 84 in import section editor. | |||||
| 5 | Click Import | |||||
| 6 | Rename this section as HammerHeadSec | |||||
| 7 | Assign Material as Fc_4ksi (If the material type came as Fc_4ksi is already assigned by default, there is no need to assign it again) | |||||
| 8 | Repeat the same steps from 2 to 7 for the second rectangular section Enter Witdh Width and Depth
Rename this section as HalfHammerHeadSec1 Assign Material as Fc_4ksi |  | ||||
| 9 | Repeat the same steps from 2 to 7 for the third rectangular section Enter Witdh and Depth
Rename this section as HalfHammerHeadSec2 Assign Material as: Fc_4ksi |  | ||||
| 10 | Repeat the same steps from 2 to 7 for the third rectangular section Enter Witdh and Depth
Rename this section as ColSec_P2 Assign Material as: Fc_5ksi |  | ||||
| 11 | Repeat the same steps from 2 to 7 for the third rectangular section Enter Witdh and Depth
Rename this section as ColSec_P3 Assign Material as: Fc_5ksi |  | ||||
| 12 | Repeat the same steps from 2 to 7 for the third rectangular section Enter Witdh and Depth
Rename this section as PileSec Assign Material as: Fc_5ksi |  | ||||
| 13 | Import another section by selecting
Assign Material as: A709_50W |  | ||||
| 14 | Import another section by selecting OpenBrIM Bridge Objects > AISC Steel Shape Database > L Type > AISCWT6X6X7/8 Assign Material as: A709_50W |  | ||||
| 15 | Create a new section by defining its name as RigidSection |  | ||||
| 16 | Copy and pastethe data below.
|
...