...
| 1 | Navigate to Load Geometry Definitions > Surface > Quadrilateral |  |
| 2 | Click three-dots icon on Bridge cell and set “BRG1”. | |
| 3 | Enter Start Station, End Station and Surface Width data as follows for LS1 (Load Surface Definitions).
|  |
| 4 | Navigate to Loads > Surface Load | 
|
| 5 | "Click on the three-dots icon in the surface cell, and set LS1 to identify the construction stages that have a surface load." | |
| 6 | As per the construction stages in the project, you should define 3 surface loads. Then enter the name. | |
| 7 | Click three-dots icon on Stage cell and click select. Enter the stage data as follows:
| 
|
| 8 | Enter the magnitudes of the (Surface) Loads to be applied on Surface as in the figure. |  |
| 9 | "In this cell, set the Element's stage, which indicates which surface load will be applied to each surface." |  |
...
| Insert excerpt | ||||||||
|---|---|---|---|---|---|---|---|---|
|
...