Content Comparison

Navigate to Properties > Sections

To import a section, click on the three-dot icon located on the first cell of the Name and select "Import Section".

Select OpenBrIM Bridge Objects > Basic Sections > Basic Shapes > Rectangle

Enter Width as 54 60 and Depth as 69 84 in import section editor.

Click Import

Rename this section as HammerHeadSec

Assign Material as Fc_4ksi

(If the material type came as default, there is no need to assign)

Repeat the same steps from 2 to 7 for the second rectangular section

Enter Witdh and Depth

• Width: 66

• Depth: 54

Rename this section as HalfHammerHeadSec1

Assign Material as Fc_4ksi

Repeat the same steps from 2 to 7 for the third rectangular section

Enter Witdh and Depth

• Width: 66

• Depth: 125

Rename this section as HalfHammerHeadSec2

Assign Material as: Fc_4ksi

Repeat the same steps from 2 to 7 for the third rectangular section

Enter Witdh and Depth

• Width: 72

• Depth: 72

Rename this section as ColSec_P2

Assign Material as: Fc_5ksi

Repeat the same steps from 2 to 7 for the third rectangular section

Enter Witdh and Depth

• Width: 180 204

• Depth: 78

Rename this section as ColSec_P3

Assign Material as: Fc_5ksi

Repeat the same steps from 2 to 7 for the third rectangular section

Enter Witdh and Depth

• Width: 24

• Depth: 24

Rename this section as PileSec

Assign Material as: Fc_5ksi

Import another section by selecting

OpenBrIM Bridge Objects > AISC Steel Shape Database > WT Type > AISCWT6X29

Assign Material as: A709_50W

Import another section by selecting

OpenBrIM Bridge Objects > AISC Steel Shape Database > L Type > AISCWT6X6X7/8

Assign Material as: A709_50W

Create a new section by defining its name as RigidSection

Copy and pastethe data below.

RigidSection	RigidMaterial	6400.0000	6400.0000	6400.0000	3413333.3333	3413333.3333	3413333.3333	0.0000	YES	NO	NO

From any cell of the HammerHeadSec row, click on three-dots icon to open Section Editor panel.

Click + icon at the left top side of the screen.

And Select Rebar

Enter:

• Profile: ASTMA615No8 ASTMA615No10

• Material: A615_60

• Reference Edge: Top

• Dist. … Outer Surface of Rebar: 2.5 4

• Rebar Spacing: 0 8

• # of Rebars (per Row): 6 7

• # of Rows: 2

• Row Spacing: 1.27 in

Click Add.

Click … icon shown on top middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

0.0000	0.0000
-24.0000	31.0000
24.0000	31.0000

Paste copied data.

Click again + icon at the left top side of the screen.

Image Removed

again + icon at the left top side of the screen.

Image Added

The reinforcement identification process will be carried out three times on the bottom reference edge.

Select Rebar

• Profile: ASTMA615No8 ASTMA615No10

• Material: A615_60

• Reference Edge: Bottom

• Dist. … Outer Surface of Rebar: 2.5 15

• Rebar Spacing: 0 8

• # of Rebars (per Row): 6 7

• # of Rows: 2

• Row Spacing: 1.27 in

Click Add.

Click … icon shown on top middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

0.0000	0.0000
-24.0000	-31.0000
24.0000	-31.0000

Paste copied data.

Click again + icon at the left top side of the screen.

Select Rebar

• Profile: ASTMA615No8

• Material: A615_60

• Reference Edge: Left

• Dist. … Outer Surface of Rebar: 2.5

• Rebar Spacing: 0

• # of Rebars (per Row): 6

• # of Rows: 1

Click Add.

Click … icon shown on left middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

0.0000	0.0000
-24.0000	-24.0000
-24.0000	24.0000

Paste copied data.

Click again + icon at the left top side of the screen.

Select Rebar

• Profile: ASTMA615No8

• Material: A615_60

• Reference Edge: Right

• Dist. … Outer Surface of Rebar: 2.5

• Rebar Spacing: 0

• # of Rebars (per Row): 6

• # of Rows: 1

Click Add.

Click … icon shown on right middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

0.0000	0.0000
24.0000	-24.0000
24.0000	24.0000

Paste copied data.