Content Comparison

...

1

Navigate to Properties > Sections

2

To import a section, click on the three-dot icon located on the first cell of the Name and select "Import Section".

3

Select OpenBrIM Bridge Objects > Basic Sections > Basic Shapes > Rectangle

4

Enter Width as 60 and Depth as 84 in import section editor.

5

Click Import

6

Rename this section as HammerHeadSec

7

Assign Material as Fc_4ksi

(If the material type came as default, there is no need to assign)

8

Repeat the same steps from 2 to 7 for the second rectangular section

Enter Witdh and Depth

Width: 66
Depth: 54

Rename this section as HalfHammerHeadSec1

Assign Material as Fc_4ksi

9

Repeat the same steps from 2 to 7 for the third rectangular section

Enter Witdh and Depth

Width: 66
Depth: 125

Rename this section as HalfHammerHeadSec2

Assign Material as: Fc_4ksi

10

Repeat the same steps from 2 to 7 for the third rectangular section

Enter Witdh and Depth

Width: 72
Depth: 72

Rename this section as ColSec_P2

Assign Material as: Fc_5ksi

11

Repeat the same steps from 2 to 7 for the third rectangular section

Enter Witdh and Depth

Width: 204
Depth: 78

Rename this section as ColSec_P3

Assign Material as: Fc_5ksi

12

Repeat the same steps from 2 to 7 for the third rectangular section

Enter Witdh and Depth

Width: 24
Depth: 24

Rename this section as PileSec

Assign Material as: Fc_5ksi

13

Import another section by selecting

OpenBrIM Bridge Objects > AISC Steel Shape Database > WT Type > AISCWT6X29

Assign Material as: A709_50W

14

Import another section by selecting

OpenBrIM Bridge Objects > AISC Steel Shape Database > L Type > AISCWT6X6X7/8

Assign Material as: A709_50W

15

Create a new section by defining its name as RigidSection

16

Copy and pastethe data below.

Code Block

language	xml

RigidSection	RigidMaterial	6400.0000	6400.0000	6400.0000	3413333.3333	3413333.3333	3413333.3333	0.0000	YES	NO	NO

...

Info
Please follow the instructions provided below to set rebar detailing for HammerHeadSec.

Image Removed

1

From any cell of the HammerHeadSec row, click on three-dots icon to open Section Editor panel.

2

Click + icon at the left top side of the screen.

And Select Rebar

3

Enter:

Profile: ASTMA615No10
Material: A615_60
Reference Edge: Top
Dist. … Outer Surface of Rebar: 4
Rebar Spacing: 8
# of Rebars (per Row): 7
# of Rows: 2
Row Spacing: 1.27 in

Click Add.

4

Click again + icon at the left top side of the screen.

Image Added

5

The reinforcement identification process will be carried out three times on the bottom reference edge.

Select Rebar

Profile: ASTMA615No10
Material: A615_60
Reference Edge: Bottom
Dist. … Outer Surface of Rebar: 15
Rebar Spacing: 8
# of Rebars (per Row): 7
# of Rows: 2
Row Spacing: 1.27 in

Click Add.

6

7

Click … icon shown on top middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block

language	xml

0.0000	0.0000
-24.0000	-31.0000
24.0000	-31.0000

Image Removed

8

Paste copied data.

9

Click again + icon at Repeat the same step for

Dist. … Outer Surface of Rebar: 9.5
Dist. … Outer Surface of Rebar: 4

values.

7

Click again + icon at the left top side of the screen.

Image RemovedImage Added

108

Select Rebar

Profile: ASTMA615No8 ASTMA615No10
Material: A615_60
Reference Edge: Left
Dist. … Outer Surface of Rebar: 2.5
Rebar Spacing: 0 6
# of Rebars (per Row): 6 9
# of Rows: 1

Click Add.

119

Click … icon shown on left middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block

language	xml

0.0000	06.0000
-24.00003650	-24.0000
-24.00003650	24.0000

Image Removed

Image Added

1210

Paste copied data.

1311

Click again + icon at the left top side of the screen.

Image RemovedImage Added

1412

Select Rebar

Profile: ASTMA615No8
Material: A615_60
Reference Edge: Right
Dist. … Outer Surface of Rebar: 2.5
Rebar Spacing: 0 6
# of Rebars (per Row): 6 9
# of Rows: 1

Click Add.

1513

Click … icon shown on right middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block

language	xml

0.0000	06.0000
24.00003650	-24.0000
24.00003650	24.0000

Image Removed

Image Added

1614

Paste copied data.

Info
Please follow the instructions provided below to set rebar detailing for HalfHammerHeadSec1.

1

From any cell of the HalfHammerHeadSec2 row, click on three-dots icon to open Section Editor panel.

Image Removed2

Click + icon at the left top side of the screen.

And Select Rebar

Image Removed3

Enter:

Profile: ASTMA615No8

Material

Image Removed6

Image Removed

1

From any cell of the HalfHammerHeadSec1 row, click on three-dots icon to open Section Editor panel.

Image Removed

Image Added

2

Click + icon at the left top side of the screen.

And Select Rebar

3

The reinforcement identification process will be carried out three times on the top reference edge.

Enter:

Profile: ASTMA615No8 ASTMA615No10
Material: A615_60
Reference Edge: Top
Dist. … Outer Surface of Rebar: 2.5 16
Rebar Spacing: 0 8
# of Rebars (per Row): 10 8
# of Rows: 2
Row Spacing: 1.27 in

Click Add.

Image Added

4

Click … icon shown on top middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block

language	xml

0.0000	0.0000
-30.0000	23.0000
30.0000	23.0000

Image Removed

5

Paste copied data.

Repeat the same step for

Dist. … Outer Surface of Rebar: 10
Dist. … Outer Surface of Rebar: 4

values.

5

Click again + icon at the left top side of the screen.

Image RemovedImage Added

76

Select Rebar

Profile: ASTMA615No8 ASTMA615No10
Material: A615_60
Reference Edge: Bottom
Dist. … Outer Surface of Rebar: 2.5 4
Rebar Spacing: 0 8
# of Rebars (per Row): 10 8
# of Rows: 2
Row Spacing: 1.27 in

Click Add.

87

Click … icon shown on top middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block

language	xml

0.0000	0.0000
-30.0000	-23.0000
30.0000	-23.0000

Image Removed

9

Paste copied data.

10

Click again + icon at the left top side of the screen.

11

Select Rebar

Profile: ASTMA615No8
Material: A615_60

Reference Edge: Left
Dist. … Outer Surface of Rebar: 2.5
Rebar Spacing: 0
# of Rebars (per Row): 6
# of Rows: 1

Click Add.

12

Click … icon shown on left middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block

language	xml

0.0000	0.0000
-30.0000	-18.0000
-30.0000	18.0000

Image Removed

13

Paste copied data.

14

Click again + icon at the left top side of the screen.

15

Select Rebar

Profile: ASTMA615No8
Material: A615_60

Reference Edge: Right
Dist. … Outer Surface of Rebar: 2.5
Rebar Spacing: 0
# of Rebars (per Row): 6
# of Rows: 1

Click Add.

16

Click … icon shown on right middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block

language	xml

0.0000	0.0000
30.0000	-18.0000
30.0000	18.0000

Image Removed

17

Paste copied data.

Info
Please follow the instructions provided below to set rebar detailing for HalfHammerHeadSec2.

again + icon at the left top side of the screen.

Image Added

8

Select Rebar

Profile: ASTMA615No10
Material: A615_60
Reference Edge: Left
Dist. … Outer Surface of Rebar: 4
Rebar Spacing: 6
# of Rebars (per Row): 3
# of Rows: 1

Click Add.

9

Click … icon shown on left middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block

language	xml

0.0000	-6.0000
-28.3650	-6.0000
-28.3650	6.0000

Image Added

10

Paste copied data.

11

Click again + icon at the left top side of the screen.

Image Added

12

Select Rebar

Profile: ASTMA615No10
Material: A615_60
Reference Edge: Right
Dist. … Outer Surface of Rebar: 4
Rebar Spacing: 6
# of Rebars (per Row): 3
# of Rows: 1

Click Add.

13

Click … icon shown on right middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block

language	xml

0.0000	-6.0000
28.3650	-6.0000
28.3650	6.0000

Image Added

14

Paste copied data.

Info
Please follow the instructions provided below to set rebar detailing for HalfHammerHeadSec2.

Image Removed

1

From any cell of the HalfHammerHeadSec2 row, click on three-dots icon to open Section Editor panel.

Image Added

2

Click + icon at the left top side of the screen.

And Select Rebar

Image Added

3

The reinforcement identification process will be carried out three times on the top reference edge.

Enter:

Profile: ASTMA615No10
Material: A615_60
Reference Edge: Top
Dist. … Outer Surface of Rebar: 16
Rebar Spacing: 8
# of Rebars (per Row): 8
# of Rows: 2
Row Spacing: 1.27 in

Click Add.

Image Added

4

Repeat the same step for

Dist. … Outer Surface of Rebar: 10
Dist. … Outer Surface of Rebar: 4

values.

5

Click again + icon at the left top side of the screen.

Image Added

6

Select Rebar

Profile: ASTMA615No10
Material: A615_60
Reference Edge: Top Bottom
Dist. … Outer Surface of Rebar: 2.5 4
Rebar Spacing: 0 8
# of Rebars (per Row): 10 8
# of Rows: 2
Row Spacing: 1.27 in

Click Add.

Image Removed

47

Click … icon shown on top middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block

language	xml

0.0000	0.0000
-30.0000	59.0000
30.0000	59.0000

Image Removed

5

Paste copied data.

6

Click again + icon at the left top side of the screen.

7

Select Rebar

Profile: ASTMA615No8
Material: A615_60

Reference Edge: Bottom

Dist. … Outer Surface of Rebar: 2.5

Rebar Spacing: 0

# of Rebars (per Row): 10

again + icon at the left top side of the screen.

Image Added

8

Select Rebar

Profile: ASTMA615No10
Material: A615_60
Reference Edge: Left
Dist. … Outer Surface of Rebar: 4
Rebar Spacing: 6
# of Rebars (per Row): 15
# of Rows: 1

Click Add.

89

Click … icon shown on top left middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block

language	xml

0.0000	0-6.0000
-3028.00003650	-5942.0000
30-28.00003650	-5942.0000

Image Removed

Image Added

910

Paste copied data.

1011

Click again + icon at the left top side of the screen.

Image RemovedImage Added

1112

Select Rebar

Profile: ASTMA615No8 ASTMA615No10
Material: A615_60
Reference Edge: Left Right
Dist. … Outer Surface of Rebar: 2.5 4
Rebar Spacing: 0 6
# of Rebars (per Row): 10 15
# of Rows: 1

Click Add.

1213

Click … icon shown on left right middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block

language	xml

0.0000	0-6.0000
-3028.00003650	-5042.0000
-3028.00003650	5042.0000

Image Removed

Image Added

1314

Paste copied data.

14

Click again .

Info
Please follow the instructions provided below to set rebar detailing for ColSec_P2

15

1	From any cell of the ColSec_P2 row, click on three-dots icon to open Section Editor panel.	Image Added
2	Click + icon at the left top side of the screen.

Image Removed

And Select Rebar

Image Added

3

Enter:

Profile:

ASTMA615No8

ASTMA615No11
Material: A615_60
Reference Edge:

Right

Top
Dist. … Outer Surface of Rebar:

2.5

4
Rebar Spacing:

0

6
# of Rebars (per Row):

10

11
# of Rows: 1

Click Add.

Image Added

16

4

Click

… icon shown on right middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block

language	xml

0.0000	0.0000
30.0000	-50.0000
30.0000	50.0000

Image Removed

17

Paste copied data.

Info
Please follow the instructions provided below to set rebar detailing for ColSec_P2

Enter:

Image Removed

Click again

1

From any cell of the ColSec_P2 row, click on three-dots icon to open Section Editor panel.

Image Removed

2

Click again + icon at the left top side of the screen.

Image Added

5

Select Rebar

Profile: ASTMA615No11
Material: A615_60
Reference Edge: Bottom
Dist. … Outer Surface of Rebar: 4
Rebar Spacing: 6
# of Rebars (per Row): 11
# of Rows: 1

Click Add.

6

Click again + icon at the left top side of the screen. And Select Rebar

Image Added

Image Removed

3

7

Select Rebar

Profile: ASTMA615No8 ASTMA615No11
Material: A615_60
Reference Edge: Top Left
Dist. … Outer Surface of Rebar: 2.5 4
Rebar Spacing: 0 6
# of Rebars (per Row): 12 9
# of Rows: 1

Click Add.

Image Removed

48

Click … icon shown on top middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block

language	xml

0.0000	0.0000
33.0000	33.0000
-33.0000	33.0000

Image Removed

5

Paste copied data.

6

Click again + icon at the left top side of the screen.

7

Select Rebar

Profile: ASTMA615No8
Material: A615_60

Reference Edge: Bottom

Dist. … Outer Surface of Rebar: 2.5

Rebar Spacing: 0

# of

again + icon at the left top side of the screen.

Image Added

9

Select Rebar

Profile: ASTMA615No11
Material: A615_60
Reference Edge: Right
Dist. … Outer Surface of Rebar: 4
Rebar Spacing: 6
# of Rebars (per Row): 12 9
# of Rows: 1

Click Add.

8

Click … icon shown on top middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block

language	xml

0.0000	0.0000
33.0000	-33.0000
-33.0000	-33.0000

Image Removed

9

Paste copied data.

10

Info
Please follow the instructions provided below to set rebar detailing for ColSec_P3

1

From any cell of the ColSec_P3 row, click on three-dots icon to open Section Editor panel.

Image Added

2

Click + icon at the left top side of the screen.

And Select Rebar

Image Removed

Image Added

11

3

Select Rebar

Enter:

Profile:

ASTMA615No8

ASTMA615No11
Material: A615_60
Reference Edge:

Left

Top
Dist. … Outer Surface of Rebar:

2.5

4
Rebar Spacing:

0

6
# of Rebars (per Row

): 10

# of Rows: 1

Click Add.

12

Click … icon shown on left middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block

language	xml

0.0000	0.0000
-33.0000	27.0000
-33.0000	-27.0000

Image Removed

13

Paste copied data.

14

Click again + icon at the left top side of the screen.

Image Removed

15

Select Rebar

Profile: ASTMA615No8
Material: A615_60

Reference Edge: Right
Dist. … Outer Surface of Rebar: 2.5
Rebar Spacing: 0
# of Rebars (per Row): 10
# of Rows: 1

Click Add.

16

Click … icon shown on right middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block

language	xml

0.0000	0.0000
33.0000	27.0000
33.0000	-27.0000

Image Removed17

Paste copied data.

Info
Please follow the instructions provided below to set rebar detailing for ColSec_P3

Image Removed

Select Rebar

Profile: ASTMA615No8
Material: A615_60

Reference Edge: Bottom
Dist. … Outer Surface of Rebar: 2.5
Rebar Spacing: 0
# of Rebars (per Row): 22
# of Rows: 1

Click Add.

1014

1

From any cell of the ColSec_P3 row, click on three-dots icon to open Section Editor panel.

Image Removed

2

Click + icon at the left top side of the screen.

And Select Rebar

Image Removed

3

Enter:

Profile: ASTMA615No8
Material: A615_60

Reference Edge: Top
Dist. … Outer Surface of Rebar: 2.5
Rebar Spacing: 0
# of Rebars (per Row): 22
# of Rows: 1

Click Add.

Image Removed

4

Click … icon shown on top middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block

language	xml

0.0000	0.0000
87.0000	36.0000
-87.0000	36.0000

Image Removed

5

Paste copied data.

6

Click again + icon at the left top side of the screen.

7

8

Click … icon shown on top middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block

language	xml

0.0000	0.0000
87.0000	-36.0000
-87.0000	-36.0000

Image Removed

9

Paste copied data.

): 33
# of Rows: 2
Row Spacing: 1.41 in

Click Add.

Image Added

4

Click again + icon at the left top side of the screen.

Image RemovedImage Added

115

Select Rebar

Profile: ASTMA615No8 ASTMA615No11
Material: A615_60
Reference Edge: Left Bottom
Dist. … Outer Surface of Rebar: 2.5 4
Rebar Spacing: 0 6
# of Rebars (per Row): 8 33
# of Rows: 2
Row Spacing: 1.41 in

Click Add.

126

Click … icon shown on left middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block

language	xml

0.0000	0.0000
-87.0000	28.0000
-87.0000	-28.0000

Image Removed

13

Paste copied data.

again + icon at the left top side of the screen.

Image Added

7

Select Rebar

Profile: ASTMA615No11
Material: A615_60
Reference Edge: Left
Dist. … Outer Surface of Rebar: 4
Rebar Spacing: 6
# of Rebars (per Row): 10
# of Rows: 2
Row Spacing: 1.41 in

Click Add.

8

Click again + icon at the left top side of the screen.

Image RemovedImage Added

159

Select Rebar

Profile: ASTMA615No8 ASTMA615No11
Material: A615_60
Reference Edge: Right
Dist. … Outer Surface of Rebar: 2.5 4
Rebar Spacing: 0
# of Rebars (per Row): 8
# of Rows: 1

Click Add.

16

Click … icon shown on right middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block

language	xml

0.0000	0.0000
87.0000	28.0000
87.0000	-28.0000

Image Removed

17

Paste copied data

: 6
# of Rebars (per Row): 10
# of Rows: 2
Row Spacing: 1.41 in

Click Add.

Version	Old Version 9	New Version 10
Changes made by	mert.goktas	mert.goktas
Saved on	Feb 21, 2023	Feb 21, 2023

Versions Compared

Key