Versions Compared

Version Old Version 6 New Version 7
Changes made by

mert.goktas

mert.goktas

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

1

From any cell of the HalfHammerHeadSec2 row, click on three-dots icon to open Section Editor panel.

2

Click + icon at the left top side of the screen.

And Select Rebar

3

Enter:

  • Profile: ASTMA615No8

  • Material: A615_60

  • Reference Edge: Top

  • Dist. … Outer Surface of Rebar: 2.5

  • Rebar Spacing: 0

  • # of Rebars (per Row): 10

  • # of Rows: 1

Click Add.

4

Click … icon shown on top middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block
languagexml
0.0000	0.0000
-30.0000	59.0000
30.0000	59.0000

Image RemovedImage Added

5

Paste copied data.

6

Click again + icon at the left top side of the screen.

7

Select Rebar

  • Profile: ASTMA615No8

  • Material: A615_60

  • Reference Edge: Bottom

  • Dist. … Outer Surface of Rebar: 2.5

  • Rebar Spacing: 0

  • # of Rebars (per Row): 10

  • # of Rows: 1

Click Add.

8

Click … icon shown on top middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block
languagexml
0.0000	0.0000
-30.0000	-59.0000
30.0000	-59.0000

9

Paste copied data.

10

Click again + icon at the left top side of the screen.

11

Select Rebar

  • Profile: ASTMA615No8

  • Material: A615_60

  • Reference Edge: Left

  • Dist. … Outer Surface of Rebar: 2.5

  • Rebar Spacing: 0

  • # of Rebars (per Row): 10

  • # of Rows: 1

Click Add.

12

Click … icon shown on left middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block
languagexml
0.0000	0.0000
-30.0000	-50.0000
-30.0000	50.0000

13

Paste copied data.

14

Click again + icon at the left top side of the screen.

15

Select Rebar

  • Profile: ASTMA615No8

  • Material: A615_60

  • Reference Edge: Right

  • Dist. … Outer Surface of Rebar: 2.5

  • Rebar Spacing: 0

  • # of Rebars (per Row): 10

  • # of Rows: 1

Click Add.

16

Click … icon shown on right middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block
languagexml
0.0000	0.0000
30.0000	-50.0000
30.0000	50.0000

17

Paste copied data.

Info

Please follow the instructions provided below to set rebar detailing for ColSec_P2

1

From any cell of the ColSec_P2 row, click on three-dots icon to open Section Editor panel.

Image Added
2

Click + icon at the left top side of the screen.

And Select Rebar

Image Added
3

Enter:

  • Profile: ASTMA615No8

  • Material: A615_60

  • Reference Edge: Top

  • Dist. … Outer Surface of Rebar: 2.5

  • Rebar Spacing: 0

  • # of Rebars (per Row): 12

  • # of Rows: 1

Click Add.

Image Added

4

Click … icon shown on top middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block
languagexml
0.0000	0.0000
33.0000	33.0000
-33.0000	33.0000

Image Added

Image Added

5

Paste copied data.

6

Click again + icon at the left top side of the screen.

Image Added

7

Select Rebar

  • Profile: ASTMA615No8

  • Material: A615_60

  • Reference Edge: Bottom

  • Dist. … Outer Surface of Rebar: 2.5

  • Rebar Spacing: 0

  • # of Rebars (per Row): 12

  • # of Rows: 1

Click Add.

8

Click … icon shown on top middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block
languagexml
0.0000	0.0000
33.0000	-33.0000
-33.0000	-33.0000
Image Added

9

Paste copied data.

10

Click again + icon at the left top side of the screen.

Image Added

11

Select Rebar

  • Profile: ASTMA615No8

  • Material: A615_60

  • Reference Edge: Left

  • Dist. … Outer Surface of Rebar: 2.5

  • Rebar Spacing: 0

  • # of Rebars (per Row): 10

  • # of Rows: 1

Click Add.

12

Click … icon shown on left middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block
languagexml
0.0000	0.0000
-33.0000	27.0000
-33.0000	-27.0000
Image Added

13

Paste copied data.

14

Click again + icon at the left top side of the screen.

Image Added

15

Select Rebar

  • Profile: ASTMA615No8

  • Material: A615_60

  • Reference Edge: Right

  • Dist. … Outer Surface of Rebar: 2.5

  • Rebar Spacing: 0

  • # of Rebars (per Row): 10

  • # of Rows: 1

Click Add.

16

Click … icon shown on right middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block
languagexml
0.0000	0.0000
33.0000	27.0000
33.0000	-27.0000
Image Added
17

Paste copied data.

Info

Please follow the instructions provided below to set rebar detailing for ColSec_P3

1

From any cell of the ColSec_P3 row, click on three-dots icon to open Section Editor panel.

Image Added
2

Click + icon at the left top side of the screen.

And Select Rebar

Image Added
3

Enter:

  • Profile: ASTMA615No8

  • Material: A615_60

  • Reference Edge: Top

  • Dist. … Outer Surface of Rebar: 2.5

  • Rebar Spacing: 0

  • # of Rebars (per Row): 22

  • # of Rows: 1

Click Add.

Image Added

4

Click … icon shown on top middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block
languagexml
0.0000	0.0000
87.0000	36.0000
-87.0000	36.0000

Image Added

Image Added

5

Paste copied data.

6

Click again + icon at the left top side of the screen.

Image Added

7

Select Rebar

  • Profile: ASTMA615No8

  • Material: A615_60

  • Reference Edge: Bottom

  • Dist. … Outer Surface of Rebar: 2.5

  • Rebar Spacing: 0

  • # of Rebars (per Row): 22

  • # of Rows: 1

Click Add.

8

Click … icon shown on top middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block
languagexml
0.0000	0.0000
87.0000	-36.0000
-87.0000	-36.0000
Image Added

9

Paste copied data.

10

Click again + icon at the left top side of the screen.

Image Added

11

Select Rebar

  • Profile: ASTMA615No8

  • Material: A615_60

  • Reference Edge: Left

  • Dist. … Outer Surface of Rebar: 2.5

  • Rebar Spacing: 0

  • # of Rebars (per Row): 8

  • # of Rows: 1

Click Add.

12

Click … icon shown on left middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block
languagexml
0.0000	0.0000
-87.0000	28.0000
-87.0000	-28.0000
Image Added

13

Paste copied data.

14

Click again + icon at the left top side of the screen.

Image Added

15

Select Rebar

  • Profile: ASTMA615No8

  • Material: A615_60

  • Reference Edge: Right

  • Dist. … Outer Surface of Rebar: 2.5

  • Rebar Spacing: 0

  • # of Rebars (per Row): 8

  • # of Rows: 1

Click Add.

16

Click … icon shown on right middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block
languagexml
0.0000	0.0000
87.0000	-36.0000
-87.0000	-36.0000
Image Added

17

Paste copied data.