Versions Compared

Version Old Version 5 New Version 6
Changes made by

mert.goktas

mert.goktas

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

1

Navigate to Properties > Sections

2

To import a section, click on the three-dot icon located on the first cell of the Name and select "Import Section".

3

Select OpenBrIM Bridge Objects > Basic Sections > Basic Shapes > Rectangle

4

Enter Width as 54 and Depth as 69 in import section editor.

5

Click Import

6

Rename this section as HammerHeadSec

7

Assign Material as Fc_4ksi

(If the material type came as default, there is no need to assign)

8

Repeat the same steps from 2 to 7 for the second rectangular section

Enter Witdh and Depth

  • Width: 66

  • Depth: 54

Rename this section as HalfHammerHeadSec1

Assign Material as Fc_4ksi

9

Repeat the same steps from 2 to 7 for the third rectangular section

Enter Witdh and Depth

  • Width: 66

  • Depth: 125

Rename this section as HalfHammerHeadSec2

Assign Material as: Fc_4ksi

10

Repeat the same steps from 2 to 7 for the third rectangular section

Enter Witdh and Depth

  • Width: 72

  • Depth: 72

Rename this section as ColSec_P2

Assign Material as: Fc_5ksi

11

Repeat the same steps from 2 to 7 for the third rectangular section

Enter Witdh and Depth

  • Width: 180

  • Depth: 78

Rename this section as ColSec_P3

Assign Material as: Fc_5ksi

12

Repeat the same steps from 2 to 7 for the third rectangular section

Enter Witdh and Depth

  • Width: 24

  • Depth: 24

Rename this section as PileSec

Assign Material as: Fc_5ksi

13

Import another section by selecting


OpenBrIM Bridge Objects > AISC Steel Shape Database > WT Type > AISCWT6X29

Assign Material as: A709_50W

14

Import another section by selecting

OpenBrIM Bridge Objects > AISC Steel Shape Database > L Type > AISCWT6X6X7/8

Assign Material as: A709_50W

15

Create a new section by defining its name as RigidSection

16

Copy and pastethe data below.

Code Block
languagexml
RigidSection	RigidMaterial	6400.0000	6400.0000	6400.0000	3413333.3333	3413333.3333	3413333.3333	0.0000	YES	NO	NO

...

Select Edit Properties.

From the opening tab enter:6

Click Apply.

11
1

From any cell of the HammerHeadSec row, click on three-dots icon to open Section Editor panel.

2

Click + icon at the left top side of the screen.

And Select Rebar

3

Enter:

  • Profile: ASTMA615No8

  • Material: A615_60

  • Reference Edge: Top

  • Dist. … Outer Surface of Rebar: 2.5

  • Rebar Spacing: 0

  • # of Rebars (per Row): 6

  • # of Rows: 1

Click Add.

4

Click … icon shown on top middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block
languagexml
0.0000	0.0000
-24.0000	31.0000
24.0000	31.0000
Image Added

5

Paste copied data.

6

Click again + icon at the left top side of the screen.

Image Added

7

Select Rebar

  • Profile: ASTMA615No8

  • Material: A615_60

Image Removed

5Image Removed

  • Reference Edge: Bottom

  • Dist. … Outer Surface of Rebar: 2.5

  • Rebar Spacing: 0

  • # of Rebars (per Row): 6

  • # of Rows: 1

Click Add.

8

Click … icon shown on top middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block
languagexml
0.0000	0.0000
-24.0000	-31.0000
24.0000	-31.0000
Image RemovedImage Added

79

Paste copied data.

810

Click again + icon at the left top side of the screen.

Image RemovedImage Added

911

Select Rebar

  • Profile: ASTMA615No8

  • Material: A615_60

  • Reference Edge: Bottom Left

  • Dist. … Outer Surface of Rebar: 2.5

  • Rebar Spacing: 0

  • # of Rebars (per Row): 6

  • # of Rows: 1

Click Add.

1012

Click … icon shown on bottom left middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block
languagexml
0.0000	0.0000
-24.0000	-24.0000
-24.0000	24.

Select Edit Properties.

From the opening tab enter:
0000
Image Added

13

Paste copied data.

14

Click again + icon at the left top side of the screen.

Image Added

15

Select Rebar

  • Profile: ASTMA615No8

  • Material: A615_60

Image Removed

  • Reference Edge: Right

  • Dist. … Outer Surface of Rebar: 2.5

  • Rebar Spacing: 0

  • # of Rebars (per Row): 6

  • # of Rows: 1

Click Add.

16

Click … icon shown on top right middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block
languagexml
0.0000	0.0000
-24.0000	-3124.0000
24.0000	-3124.0000
Image RemovedImage Added
1217

Paste copied data.

13

Click again .

Info

Please follow the instructions provided below to set rebar detailing for HalfHammerHeadSec1.

1

From any cell of the HalfHammerHeadSec1 row, click on three-dots icon to open Section Editor panel.

Image Added
2

Click + icon at the left top side of the screen.

Image Removed

14Select Rebar

And Select Rebar

Image Added
3

Enter:

  • Profile: ASTMA615No8

  • Material: A615_60

  • Reference Edge:

Left

  • Top

  • Dist. … Outer Surface of Rebar: 2.5

  • Rebar Spacing: 0

  • # of Rebars (per Row):

6

  • 10

  • # of Rows: 1

Click Add.

15
Image Added

4

Click … icon shown on

left

top middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Select Edit Properties.

From the opening tab enter:16

Code Block
languagexml
0.0000	0.0000
-30.0000	23.0000
30.0000	23.0000
Image Added

Image Added

5

Paste copied data.

6

Click again + icon at the left top side of the screen.

Image Added

7

Select Rebar

  • Profile: ASTMA615No8

  • Material: A615_60

Image Removed

  • Reference Edge: Bottom

  • Dist. … Outer Surface of Rebar: 2.5

  • Rebar Spacing: 0

  • # of Rebars (per Row): 10

  • # of Rows: 1

Click Add.

8

Click … icon shown on

left

top middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block
languagexml
0.0000	0.0000
-
24
30.0000	-
24
23.0000
-24
30.0000
24
-23.0000
Image Removed
Image Added

17
9

Paste copied data.

18
10

Click again + icon at the left top side of the screen.

Image Removed

Image Added

19

11

Select Rebar

  • Profile: ASTMA615No8

  • Material: A615_60

  • Reference Edge:

Right

  • Left

  • Dist. … Outer Surface of Rebar: 2.5

  • Rebar Spacing: 0

  • # of Rebars (per Row): 6

  • # of Rows: 1

Click Add.

20
12

Click … icon shown on

right

left middle edge of rebar

.

Select Edit Properties.

From the opening tab enter:

.

Click Points Spreadsheet.

Copy the data below.

Code Block
languagexml
0.0000	0.0000
-30.0000	-18.0000
-30.0000	18.0000
Image Added

13

Paste copied data.

14

Click again + icon at the left top side of the screen.

Image Added

15

Select Rebar

  • Profile: ASTMA615No8

  • Material: A615_60

Image Removed

21

  • Reference Edge: Right

  • Dist. … Outer Surface of Rebar: 2.5

  • Rebar Spacing: 0

  • # of Rebars (per Row): 6

  • # of Rows: 1

Click Add.

16

Click … icon shown on right middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block
languagexml
0.0000	0.0000
24
30.0000	-
24
18.0000
24
30.0000
24
18.0000
Image Removed
Image Added
22
17

Paste copied data.

Info

Please follow the instructions provided below to set rebar detailing for HalfHammerHeadSec1HalfHammerHeadSec2.

1

From any cell of the

HalfHammerHeadSec1

HalfHammerHeadSec2 row, click on three-dots icon to open Section Editor panel.

Image Removed
Image Added
2

Click + icon at the left top side of the screen.

And Select Rebar

Image Removed
Image Added

3

Enter:

  • Profile: ASTMA615No8

  • Material: A615_60

  • Reference Edge: Top

  • Dist. … Outer Surface of Rebar: 2.5

  • Rebar Spacing: 0

  • # of Rebars (per Row): 10

  • # of Rows: 1

Click Add.

Image Removed
Image Added

4

Click … icon shown on top middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block
languagexml
0.0000	0.0000
-30.0000

23

59.0000
30.0000

23

59.0000

Image Removed
Image Added

Image Removed

Image Added

5

Paste copied data.

6

Click again + icon at the left top side of the screen.

Image Removed

Image Added

7

Select Rebar

  • Profile: ASTMA615No8

  • Material: A615_60

  • Reference Edge: Bottom

  • Dist. … Outer Surface of Rebar: 2.5

  • Rebar Spacing: 0

  • # of Rebars (per Row):

6

  • 10

  • # of Rows: 1

Click Add.

8

Click … icon shown on top middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block
languagexml
0.0000	0.0000
-30.0000	-
23
59.0000
30.0000	-
23
59.0000
Image Removed
Image Added

9

Paste copied data.

10

Click again + icon at the left top side of the screen.

Image Removed

Image Added

11

Select Rebar

  • Profile: ASTMA615No8

  • Material: A615_60

  • Reference Edge: Left

  • Dist. … Outer Surface of Rebar: 2.5

  • Rebar Spacing: 0

  • # of Rebars (per Row):

6

  • 10

  • # of Rows: 1

Click Add.

12

Click … icon shown on left middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block
languagexml
0.0000	0.0000
-30.0000	-
18
50.0000
-30.0000
18
50.0000
Image Removed
Image Added

13

Paste copied data.

14

Click again + icon at the left top side of the screen.

Image Removed

Image Added

15

Select Rebar

  • Profile: ASTMA615No8

  • Material: A615_60

  • Reference Edge: Right

  • Dist. … Outer Surface of Rebar: 2.5

  • Rebar Spacing: 0

  • # of Rebars (per Row):

6

  • 10

  • # of Rows: 1

Click Add.

16

Click … icon shown on right middle edge of rebar.

Click Points Spreadsheet.

Copy the data below.

Code Block
languagexml
0.0000	0.0000
24
30.0000	-
24
50.0000
24
30.0000
24
50.0000
Image Removed
Image Added

17

Paste copied data.

18

Info

Please follow the instructions provided below to set rebar detailing for ColSec_P2