| Info |
|---|
Follow the next steps to add Stories to the BDS project. |
Table 1: Stories
| 1 | Go to Stories from tree view. Click Add button and adding “1” floors. Enter 12 feet at the elevation of floor. |  |
| 2 | Enter Story Height value and Defult Materials Type data. |  |
| 3 | Set the previously uploaded drawing file to 1st Floor. |
...
| 1 | Go to Shearwall under 1st Floor from tree view. Click the “Draw Beam” button and draw beam while following the overlayed drawing. |  | |||||
| 2 | Enter Depth data of each beam. | ||||||
| 3 |
| ||||||
| 4 | Go to Analytical Lines Tab under Beam in spreadsheet. Click “Draw Analytical Beam” button and draw to inside beam. |   | |||||
| 5 | Enter Width data of each Beam Analytical Line. | ||||||
| 6 |
| ||||||
| 7 | Go to Beams at samet spreadsheet. Click “Show Tributary” button. This button shows tributary area of the each Beams. |  | |||||
| 8 |
| ||||||
...