Content Comparison

Go to 1st floor under Slab Analysis from tree view.

Fill in the blanks in the spreadsheet according to your project.

Press the "Run Mesh" button to check the mesh quality.

Click “Run Slab Analysis” button.

After the analysis is complete, the Slab Analysis results is open.

Here you can see the results for each load case.

• “Model”

• “Loading”

• “Deformed”

• “Line Forces”,

• “Surface Forces”

• “Composite Forces” for each

We can see the results in the browser.
Go to the AEC|BOLT BIM Cloud page and press "Open".
The most recent analysis in BDS is displayed in the browser.

Click "Analysis:: Slab Reinforcement Training Example" and open “AEC_SlabAnalysisTemplate2”.

Click “FEA” button abd Run Analysis.

Open the "DATA" spreadsheet after analysis.
After the spreadsheet is opened, do the following steps in order.
FEM → Node Reaction (Global) → Self Weight

Then hover over the Force Z column. Click on the 3 dots that appear, open "Quick Stats" from the dropdown box

The sum value will give the total Self Weight analysis result of this Slab.