Versions Compared

Version Old Version 5 New Version 6
Changes made by

mert.goktas

mert.goktas

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Info

Follow the below instruction to Run Slab Analysis.

Table 2: Slab Analysis

9
1

Go to 1st floor under Slab Analysis from tree view.

Fill in the blanks in the spreadsheet according to your project.

Press the Click "Run Mesh" button to check the mesh quality.

2
Expand
titleCAD view

3

Click “Run Slab Analysis” button.

After the analysis is complete, the Slab Analysis results is open.

Here you can see the results for each load case.

  • “Model”

  • “Loading”

  • “Deformed”

  • “Line Forces”,

  • “Surface Forces”

  • “Composite Forces” for each

4
Expand
titleSlab Analysis Result Combobox

5

We can see the results in the browser.
Go to the AEC|BOLT BIM Cloud page and press "Open".
The most recent analysis in BDS is displayed in the browser.


Click "Analysis:: Slab Reinforcement Training Example" and open “AEC_SlabAnalysisTemplate2”.

Click “FEA” button abd Run Analysis.

6
7

Open the "DATA" spreadsheet after analysis.
After the spreadsheet is opened, do the following steps in order.
FEM → Node Reaction (Global) → Self Weight

Then hover over the Force Z column. Click on the 3 dots that appear, open "Quick Stats" from the dropdown box

The sum value will give the total Self Weight analysis result of this Slab.

8

...

Info

Follow the below instruction to Export&Import Safe Analysis and Result.

Table 3: Safe Export & Import

1

Go to 1st Floor under CSI SAFE from tree view.

2

3