Content Comparison

...

Panel

Follow the next steps to define construction of substructure bridge components.

Go to Loading/Construction/Substructure,click Bearing.29

1	Image Removed
2	Select a Stage at Superstructure Connection Construction tab as GirderStage.	Image Removed
3	Pick Insertion Points.	Image Removed
4	Click all the Insertion Points.	Image Removed
5	Click Done.	Image Removed
6	Proceed with Pier Cap/End Bent (Complete).
72	Select a Stage as SubstrConstStage.
83	Pick Pier Caps.
94	Click on PierCap1 and PierCap2.
105	Click Done.
116	Set Self Weight Factor to 1.
12	Proceed with Pier Column.	Image RemovedImage Removed
13	Select a Stage as SubstrConstStage.	Image RemovedImage Removed
14	Pick Columns.	Image Removed
15	Click on all the columns.
16	Click Done.
17	Set Self Weight Factor to 1.	Image Removed
18	Proceed with Foundation (Complete).	Image RemovedImage Removed
19	Select a Stage as SubstrConstStage.	Image RemovedImage Removed
20	Pick Foundation.	Image Removed
21	Click on all the foundations.
22	Click Done.
23	Set Self Weight Factor to 1.	Image Removed
24	Proceed with Pile.	Image RemovedImage Removed
25	Select a Stage as SubstrConstStage.	Image RemovedImage Removed
26	Pick Substructures Above.	Image Removed
27	Click on all the foundations.
28	Click Done.
	Set Individual Piles as Empty.	Image Removed
30	Set Self Weight Factor to 1.	Image Removed

...

Insert excerpt

9

1	Go to Bearing under Substructure on the tree view.
2	Copy Superstructure Connection Construction from model inputs and paste into OpenBrIM.
3	Go to Pier Cap/End Bent (Complete) under Substructure on the tree view.
42	Copy Pier Cap Construction from model inputs and paste into OpenBrIM.
5	Go to Pier Column under Substructure on the tree view.
6	Copy Pier Column Construction from model inputs and paste into OpenBrIM.
7	Go to Foundation (Complete) under Substructure on the tree view.
8	Copy Foundation Construction from model inputs and paste into OpenBrIM.	Go to Pile under Substructure on the tree view.
10	Copy Pile Construction from model inputs and paste into OpenBrIM.

...

Anchor

	ModelInputs
	ModelInputs

Insert excerpt

...

Bearing

Superstructure Connection Construction

...

SCC1	GirderStage	[IP8,IP7,IP6,IP5,IP4,IP3,IP2,IP1,IP12,IP11,IP10,IP9,IP16,IP15,IP14,IP13]

Pier Cap/End Bent (Complete)

Pier Cap Construction

Code Block
PCC1 SubstrConstStage [PierCap1,PierCap2] 1

Pier Column

Pier Column Construction

Code Block
PCC2 SubstrConstStage [PierColumn1,PierColumn2,PierColumn3,PierColumn4,PierColumn5] 1

Foundation (Complete)

Foundation Construction

Code Block
FC1 SubstrConstStage [Footing1,Footing2] 1

Pile

Pile Construction

Code BlockPC1 SubstrConstStage [Footing1,Footing2] [

]	1

Versions Compared