Content Comparison

...

Panel

Follow the next steps to define construction of substructure bridge components.

Go to Loading/Construction/Substructure,click Bearing.20

1	Image Removed	2	Select a Stage at Superstructure Connection Construction tab as GirderStage.	Image Removed
3	Pick Insertion Points.	Image Removed
4	Click all the Insertion Points.	Image Removed
5	Click Done.	Image Removed
6	Proceed with Pier Cap/End Bent (Complete).	Image RemovedImage Removed
7	Select a Stage as SubstrConstStage.	Image RemovedImage Removed
8	Pick Pier Caps.	Image RemovedImage Removed
9	Click on PierCap1 and PierCap2.
10	Click Done.
11	Set Self Weight Factor to 1.	Image Removed
12	Proceed with Pier Column.
132	Select a Stage as SubstrConstStage.
143	Pick Columns.
154	Click on all the columns.
165	Click Done.
176	Set Self Weight Factor to 1.
18	Proceed with Foundation (Complete).	Image RemovedImage Removed
19	Select a Stage as SubstrConstStage.	Image RemovedImage Removed
	Pick Foundation.	Image Removed
21	Click on all the foundations.
22	Click Done.
23	Set Self Weight Factor to 1.	Image Removed
24	Proceed with Pile.	Image RemovedImage Removed
25	Select a Stage as SubstrConstStage.	Image RemovedImage Removed
26	Pick Substructures Above.	Image Removed
27	Click on all the foundations.
28	Click Done.
29	Set Individual Piles as Empty.	Image Removed
30	Set Self Weight Factor to 1.	Image Removed

...

Insert excerpt

7

1	Go to Bearing under Substructure on the tree view.
2	Copy Superstructure Connection Construction from model inputs and paste into OpenBrIM.
3	Go to Pier Cap/End Bent (Complete) under Substructure on the tree view.
4	Copy Pier Cap Construction from model inputs and paste into OpenBrIM.
5	Go to Pier Column under Substructure on the tree view.
62	Copy Pier Column Construction from model inputs and paste into OpenBrIM.	Go to Foundation (Complete) under Substructure on the tree view.
8	Copy Foundation Construction from model inputs and paste into OpenBrIM.
9	Go to Pile under Substructure on the tree view.
10	Copy Pile Construction from model inputs and paste into OpenBrIM.

...

Anchor

	ModelInputs
	ModelInputs

Insert excerpt

...

Bearing

...

Superstructure Connection Construction

Code Block
SCC1 GirderStage [IP8,IP7,IP6,IP5,IP4,IP3,IP2,IP1,IP12,IP11,IP10,IP9,IP16,IP15,IP14,IP13]

...

Pier

Cap Construction

Code Block
PCC1 SubstrConstStage [PierCap1,PierCap2] 1

Pier Column

Pier Column Construction

Code Block
PCC2 SubstrConstStage [PierColumn1,PierColumn2,PierColumn3,PierColumn4,PierColumn5] 1

Foundation (Complete)

Foundation Construction

Code Block
FC1 SubstrConstStage [Footing1,Footing2] 1

Pile

Pile Construction

Code BlockPC1 SubstrConstStage [Footing1,Footing2] [

]	1

Versions Compared