| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
Follow the next steps to add F shape barriers to both sides of the bridge. |
| 1 | Go to F Shape Barrier under Superstructure Attachments on tree view. | -20221008-082635.png?version=1&modificationDate=1665217599232&cacheVersion=1&api=v2) | |||||
| 2 | Click three-dots icon on Deck and select a deck. | ||||||
| 3 | Select the Orientation of the barriers on both sides. | -20221008-082732.png?version=1&modificationDate=1665217656864&cacheVersion=1&api=v2) | |||||
| 4 | Set the concrete Material of the barrier. | -20221008-083000.png?version=1&modificationDate=1665217802792&cacheVersion=1&api=v2) | |||||
| 5 | Enter Start Transverse Offset and End Transverse Offset. | ||||||
| 6 | Go to Dimensions tab. | -20221008-083238.png?version=1&modificationDate=1665217962542&cacheVersion=1&api=v2) | |||||
| 7 | Enter Height and Width. | ||||||
| 8 |
| ||||||
| 9 | Follow the steps below to match the same inputs as illustrated model. | ||||||
| 10 | Go to F Shape Barrier under Superstructure Attachments on the tree view. | ||||||
| 11 | Copy F Shape Barrier, and Dimensions from model inputs and paste into OpenBrIM. | ||||||
-20221008-083848.png?version=1&modificationDate=1665218338301&cacheVersion=1&api=v2)
| Tip |
|---|
Completed F shape barrier is illustrated below. |
| Anchor | ||||
|---|---|---|---|---|
|
| Expand | ||
|---|---|---|
| ||
Copy the desired data with the automatic copy button in the upper left corner. Click on the first cell in and use the Ctrl+V shortcut to paste.   |
F Shape Barrier | |||||||||
|---|---|---|---|---|---|---|---|---|---|
F Shape Barrier
| Dimensions
| ||||||||