Versions Compared

Version Old Version 3 New Version 4
Changes made by

Zeynep Bayam

Orkun Gülel (Unlicensed)

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Info

Follow the below steps to add the insertion points where the bearings will be created.

1

Go to Insertion Point on tree view next to the data spreadsheet.

Image Added

2

Select a support lineas Location.

3

Enter Transverse Offset to relocate the insertion point on the support line.

Image RemovedImage Added

4
Expand
titleQuick Tip

     Skew angle and transverse offset parameters for support lines that have skew > 0.

5

Follow the steps below to match the same inputs as illustrated model.

6

Go to Insertion Point under Bridge Geometry.

7

Copy Bridge Parameters from model inputs and paste into OpenBrIM.

Tip

Insertion point layout is given below

...

.

...

Anchor
ModelInputs
ModelInputs

Expand
titleQuick Tip

Copy the desired data with the automatic copy button in the upper left corner.

Click on the first cell in and use the Ctrl+V shortcut to paste.

Image AddedImage Added

Insertion Point

Bridge Parameters

Code Block
IP1	Abut1	0	-16.5
IP2	Abut1	0	-5.5
IP3	Abut1	0	5.5
IP4	Abut1	0	16.5
IP5	Pier2	0	-16.5
IP6	Pier2	0	-5.5
IP7	Pier2	0	5.5
IP8	Pier2	0	16.5
IP9	Pier3	0	-16.5
IP10	Pier3	0	-5.5
IP11	Pier3	0	5.5
IP12	Pier3	0	16.5
IP13	Abut4	0	-16.5
IP14	Abut4	0	-5.5
IP15	Abut4	0	5.5
IP16	Abut4	0	16.5