This part is to inform about the general purposes of section definitions.
Please follow the instructions provided below to set section definitions to be used in this bridge example.
Navigate to Properties > Sections |  |
To import a section, click on the three-dot icon located on the first cell of the Name and select "Import Section". | |
Select OpenBrIM Bridge Objects > Precast I Girder Sections > FDOT I BEAMS > FIB36 Assign Material as: Fc_8_1/2ksi Select OpenBrIM Bridge Objects > Precast I Girder Sections > FDOT I BEAMS > AASHTO_TYPE_III_BEAM Assign Material as: Fc_6ksi OpenBrIM Bridge Objects > AISC Steel Shape Database > HP Type > AISCHP 14X89 Assign Material as: A709_50W OpenBrIM Bridge Objects > AISC Steel Shape Database > HP Type > AISCHP 14X89 Assign Material as: A709_50W OpenBrIM Bridge Objects > AISC Steel Shape Database > HP Type > AISCHP 18X135 Assign Material as: A709_50W OpenBrIM Bridge Objects > AISC Steel Shape Database > HP Type > AISCHSS8X4X.375 Assign Material as: A500_B |  |
 | |
 | |
Select OpenBrIM Bridge Objects > Basic Sections > Basic Shapes > Circle |   |
Enter Radius as 18 in import section editor. | |
Click Import | |
Assign Material as Fc_4ksi (If the material Fc_4ksi is already assigned by default, there is no need to assign it again) | |
Rename this section as Circle_exist_shaft_EB | |
Repeat the same steps from 2 to 7 for the second other basic section.
Rename this section as Circle_exist_shaft_Pier Assign Material as Fc_4ksi |  |
Add Comment