General

Girder: Girder for code check

Station: Station along the PGL

Code Check Template: The code check template is utilized to extract global parameters, results from finite element analysis, and limit states employed in the design process.

Panel Type [InteriorPanel/EndPanel]: The terms "end panel" and "interior panel" are used to describe the sections of a steel girder plate that are positioned at the ends and interior sections of the girder, respectively, as depicted in the accompanying figure. The interior panels comprise the remaining segments of the girder that lie between the end panels.

Modular Ratio Comp. Method [EsbyEc/User Input]:

Modular Ratio: If the Modular Ratio Comp. Method is defined with the option 'User Input,' a modular ratio can be defined manually. Otherwise, this parameter will be marked as not applicable (N/A).

Deck Reinforcement

Input Data Preference [Override Deck Rebar/Use Deck Rebar]:

Lumped Top Reinforcement Area within the Effective Width:

Distance from the CL of Top Bars to the Top of the Deck:

Lumped Bottom Reinforcement Area within the Effective Width:

Distance from the CL of Bottom Bars to the Bottom of the Deck:

Deck Rebar Material:

Concrete Creep Adjustment Factor: