Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 2 Current »

Please follow the instructions provided below to add roadway to the project.

1

Navigate to Superstructure Attachments > Roadway
The dimension data of the roadway component is utilized in the computation of influence coefficients for live loads.

 

2

Click three-dots icon on Bridge cell and set Bridge1.

3

Click three-dots icon on Roadway Dimensions and click Edit.

4

Enter Roadway Dimension data as in the figure

5
 Quick Tip

6

If desired, you can make adjustments to the lane dimensions and asphalt thickness on the "Roadway" tab. This tab allows you to modify these parameters according to 3D preferences.

 

To access additional details on each parameter, please refer to the following page.

Roadway [CUG]

Follow the below steps to copy and paste all inputs from our data set.

1

Navigate to Roadway under Superstructure Attachments on the tree view.

2

Copy General, and Roadway3D from model inputs and paste into OpenBrIM.

The Roadway that have been created are illustrated below.

 Quick Tip: Copy inputs to OpenBrIM

Copy the desired data with the automatic copy button in the upper left corner.

Click on the first cell in and use the Ctrl+V shortcut to paste.

If icon won’t appear, collapse page tree menu by clicking on arrow or using shortcut “[”.

While pasting large data, it would be handy to turn of Auto-refresh .

  • No labels