Follow the next steps to define deck cross-sections.
| 1 | You need to define at least 2 deck cross-sections along the deck. | |
| 2 | Pick 1st and 2nd Support Lines with no longitudinal offsets. | -20221008-064439.png?version=1&modificationDate=1665211500107&cacheVersion=1&api=v2) |
| 3 | Pick 1st and 2nd Support Lines with no longitudinal offsets. | |
| 4 | Go to Deck Cross Section tab. | -20221008-064648.png?version=1&modificationDate=1665211641010&cacheVersion=1&api=v2) |
| 5 | Pick the Girders for haunch locations. | |
| 6 | Enter the deck dimensions. |  |
| 7 | Follow the steps below to match the same inputs as illustrated model. | |
| 8 | Go to Cross-Section under Deck on the tree view. | |
| 9 | Copy Location, Deck Cross Section from model inputs and paste into OpenBrIM. | |
Completed deck cross section is illustrated below.
Follow the next steps to define concrete deck.
| 1 | Go to Concrete Deck on tree view. | -20221008-065120.png?version=1&modificationDate=1665211885247&cacheVersion=1&api=v2) |
| 2 | Pick Cross-sections graphically. |  |
| 3 | Import deck Material and assign it. | -20221008-065251.png?version=1&modificationDate=1665211987026&cacheVersion=1&api=v2)  |
| 4 | ||
| 5 | Follow the steps below to match the same inputs as illustrated model. | |
| 6 | Go to Concrete Deck under Deck on the tree view. | |
| 7 | Copy General from model inputs and paste into OpenBrIM. | |
Completed deck cross section is illustrated below.
Copy the desired data with the automatic copy button in the upper left corner.
Click on the first cell in and use the Ctrl+V shortcut to paste.
Deck Cross-Section | Concrete Deck | |
|---|---|---|
Location DCS1 Abut1 0 DCS2 Abut4 0 | Deck Cross Section DCS1 [G1,G2,G3,G4] 486 45 9 9 9 DCS2 [G1,G2,G3,G4] 486 45 9 9 9 | General Deck1 [DCS1,DCS2] FcCube_4ksi |
Add Comment