Arbitrary Polygon [EX1-PIG]
- mert.goktas (Unlicensed)
Please follow the instructions provided below add to the corresponding load definitions.
| 1 | Navigate to Load Geometry Definitions > Surface > Arbitrary Polygon |  |
| 2 | Click three-dots icon on Bridge cell and set “Bridge1”. | |
| 3 | Set the name as P3_foot_sur
Enter Station, Transverse Offset and Rotation data as in the figure for P3_foot_sur (Load Surface Definitions). | 
|
| 4 | Click three-dots icon on “Surface Points” cell and click Edit
|
|
| 5 | Enter Longitudinal & Transverse Distance from Reference Point value as in the figure. |
|
| 6 | Keep the default data in the Graphics section constant. | |
| 7 | To define the geometric surface of all available arbitrary polygon loads in the project, use the parameters provided in the figure. |
|
| 1 | Navigate to Arbitrary Polygon under Load Geometry Definitions on the tree view. |
| 2 | Copy Surface, and Graphics from model inputs and paste into OpenBrIM. |
Arbitrary Polygon | |
|---|---|
Surface | Graphics |
P3_foot_sur Bridge1 23983.1200 25.6000 [[0, 0],[88.80000000000001, 0],[88.80000000000001, 136.8],[0, 136.8]] 10.1200
P2_foot_sur Bridge1 23895.9930 25.4600 [[0, 0],[88.80000000000001, 0],[88.80000000000001, 136.8],[0, 136.8]] 5.2800 | P3_foot_sur 0.0000 Alignment
P2_foot_sur 0.0000 Alignment
|
Arbitrary Polygon | |
|---|---|
Surface Points (spreadsheet) for P3 | Surface Points (spreadsheet) for P2 |
0.0000 0.0000
7.4000 0.0000
7.4000 11.4000
0.0000 11.4000 | |