Pier Column Code Check T [EX1-PIG]
- mert.goktas (Unlicensed)
Please follow the instructions provided below to create Pier Column code check template
| 1 | Navigate Templates for Code Check and Load Rating > Pier Column Code Check T |
|
| 2 | It is sufficient to define one Load Combination Table for Pier Column code control.
Enter the name in the Name column as PierColCCT | |
| 3 | Click three-dots icon on Load Combination Table and assign SubstructureLCT.
Since the Pier Column is a substructure element the appropriate Load Combination Table to assign would be "SubstructureLCT". |
|
| 4 | Keep other parameters constant as follows. |
|
| 5 | “Procedures for Shear Resistance Parameters ß and θ ..”: Generalized | |
| 6 | “Limit State for Shear Check”: Strength Limit States | |
| 7 | “Interaction Diagram Limit State”: Strength Limit States | |
| 8 | “Flexure Sign (Effective Shear Depth)”: Use Critical Shear Concurrent Bending Moment | |
| 9 | Click three-dots icon on Select State Provisions and assign FDOT |
|
| 1 | Navigate to Pier Column Code Check T under Templates for Code Check on the tree view. |
| 2 | Copy General from model inputs and paste into OpenBrIM. |
The Pier Column Code Check have been created.
Pier Column Code Check T |
|---|
General |
PierColCCT SubstructureLCT Generalized Strength Limit States Strength Limit States Use Critical Shear Concurrent Bending Moment FDOT |