Load Rating Combination Table [EX1-SIG]
- Zeynep Bayam
- Melis Ceylan
- Umut Nuhat Sevinc
After clicking on ‘Combinations> Design Load Combinations> Load Rating Combination Table' in the navigation treeview, follow the steps to define the Load Rating Combination Table. You can use the collapsed documentation page below for more information on the explanations of each parameter.
| 1 | Click on Name cell and set name as LoadRatingLCT. |
|
| 2 | Enter the γDC (max) as 1.25 and γDC (min) as 1. |
|
| 3 | Click three-dots icon on DC1 cell and select a Result Extraction Case as DC1. | |
| 4 | Click three-dots icon on DC2 cell and select a Result Extraction Case as DC2. |
|
| 5 | Enter the γDW (max) as 1.5 and γDW (min) as 1. |
|
| 6 | Click three-dots icon on DW cell and select a Result Extraction Case as DW. |
|
| 7 | You can edit the Design Load from Design Load tab. Enter the γLL (Inventory) as 1.75 and γLL (Operating) as 1.35. Click three-dots icon on LL cell and select a Result Extraction Case as LLHL93Case. |
|
| 8 | You can edit the Legal Load from Legal Load tab. Keep the Legal Load parameters as default. | |
| 9 | You can edit the Emergency Load from Emergency Load tab. Keep the Emergency Load parameters as default. | |
| 10 | You can edit the Permit Load from Permit Load tab. Keep the Permit Load parameters as default. | |
| 11 | Proceed to the next step to verify the model. | |
The completed load rating combination table is illustrated below. Please verify that you have the same model on your end by examining each view provided here. For more information on how to perform visual checks, refer to the quick tips.