Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 2 Current »

External loads such as ground water pressure are assigned to foundation objects from this section.

Figure 1

→ Click Area in Figure 1 to draw area load.

→ Click Line in Figure 1 to draw line load.

→ Click Point in Figure 1 to draw point load.

→ Select load case of the load geometry as demonstrated in Figure 2.

Figure 2

  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.