Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 4 Next »

Building finite element model generation is activated from this section.

Figure 1

→ Select Run Mesh value as True to generate finite element model as shown in Figure 1.

Number of generated finite elements are shown in the spreadsheet.

Figure 2

Display options of the FE model can be found in the left bottom of 3D view as illustrated in Figure 2.

  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.