Custom

Custom pile cap templates are created from this section.

Figure 1

Click Pile Cap Edge button and draw the pile cap geometry under the columns or shear walls as demonstrated in Figure 2.

Figure 2

Figure 3

Select the concrete and rebar material of the custom pile cap and enter the properties such as cap depth, pile diameter etc. in spreadsheet as shown in Figure 3.

Figure 4

Click Show button to go to piles spreadsheet of custom pile cap as demonstrated in Figure 4.

Figure 5

Click Pile button as illustrated in Figure 5 to add piles to custom pile cap. Enter the center point of pile as shown in Figure 6.

Figure 6

Enter the properties such as capacities of each pile as demonstrated in Figure 7.

Figure 7