Bottom rebar is assigned in this section.
Figure 1
Click “Custom Zone Uniform Reinf.” button as shown in Figure 1 to draw a uniform reinforcement region in slab.
Click “Select Slab For Uniform Reinf.” button as shown in Figure 1 and select slab to assign as uniform reinforcement region.
Click “Draw Slab Reinf.” button as shown in Figure 1 to draw non uniform reinforcement. Click “Draw Region” button as shown in Figure 2 to draw region for non uniform reinforcement.
Figure 2
Enter rebar data to rebar regions as illustrated in Figure 2.
0 Comments