External Diaphragm
Support Line: Select the support line where the external diaphragm is constructed.
Girder: Select the two girders that the external diaphragm is connecting to.
The external diaphragm's sole function is to connect two girders within a single unit; in other words, it is not intended for connecting multiple girder units. To achieve that purpose, a continuity diaphragm can be employed. The external diaphragm can be defined as a continuous part of the girder unit or at the end of the girder unit. The position of the external diaphragm is updated according to the Support Line input.
Thickness: Enter the thickness value.
Material: Set the material for the external diaphragm.
0 Comments