The loads can be applied to the selected bearing by defining the related parameters below.
Bearing Load
Bearing: Specify the bearing at which the load will be applied.
Stage: Specify the stage at which the bearing load will be applied.
Fx: Specify the force applied in X-axis direction.
Fy: Specify the force applied in Y-axis direction.
Fz (Gravity): Specify the force applied in Z-axis direction.
Mx: Specify the moment applied around the X-axis.
My: Specify the moment applied around the Y-axis.
Mz: Specify the moment applied around the Z-axis.
Loads are applied taking into account bearing rotation angle
The loads defined using the Bearing Load object are applied based on the global (alignment) coordinate system. If the rotation angle parameter of the bearing is nonzero, the longitudinal and transverse directions will adjust accordingly.
0 Comments