Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 12 Next »

Bearing Load

Bearing: Specify the bearing at which the load will be applied.

Stage: Specify the stage at which the bearing load will be applied.

Fx: Specify the force applied in X-axis direction.

Fy: Specify the force applied in Y-axis direction.

Fz (Gravity): Specify the force applied in Z-axis direction.

Mx: Specify the moment applied around the X-axis.

My: Specify the moment applied around the Y-axis.

Mz: Specify the moment applied around the Z-axis.

Loads are applied taking into account bearing rotation angle

The loads defined using the Bearing Load object are applied based on the global (alignment) coordinate system. If the rotation angle parameter of the bearing is nonzero, the longitudinal and transverse directions will adjust accordingly.

image-20241213-130551.pngimage-20241018-091741.pngimage-20241214-102333.pngimage-20241214-102436.pngimage-20241214-102548.png

  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.