Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 5 Next »

After clicking on ‘Superstructure Code Checks> Bolted Field Splice Code Check (AASHTO)' in the navigation treeview, follow the steps to define the Bolted Field Splice Code Check. You can use the collapsed documentation page below for more information on the explanations of each parameter.

 Bolted Field Splice Code Check (AASHTO)
Bolted Field Splice Code Check (AASHTO) [SIG]
1

(blue star) Click three-dots icon on Splice cell and select a Bolted Field Splice as Splice1.

2

As a result of these operations, an issue will appear on the OpenBrIM screen. This does not necessarily mean that any operation was done incorrectly. The issue will be resolved when the code check template is define in the next step.

3

 Quick Tip: Learn how to read issues

When encountering the warning as seen in OpenBrIM app, there is a "issue" , it is advised to review the parameters you have provided. This warning suggests that there might be a missing or incorrect parameter in your input. Check inputs to ensure they are accurate and complete.

When a warning is clicked, the reason can be displayed. The warning is expressed in the format of Component Group Name (can be viewed in the treeview) > User Defined Component Name (can be viewed in the spreadsheet name column) > Parameter Name (can be viewed in the spreadsheet column header).

After clicking on 'Superstructure > Connections > Bolted Field Splice' in the tree view, navigate to the Bolt category. Set the Bolt Property input. The issue will be resolved after these steps.

The screenshot demonstrates one example of two Bolted Field Splice components named BFS1 and BFS2 by the user, with parameter names Flange Bolt Property and Web Bolt Property.

4

(blue star) Click the three-dots icon on the Code Check Template cell, and then set SpliceCCT.

5

(blue star) Set name as Splice1CC.

6

Proceed to the next step to verify the model.

The completed bolted field splice code check is illustrated below. Please verify that you have the same model on your end by examining each view provided here. For more information on how to perform visual checks, refer to the quick tips.

To view the entire procedure explained on this page, please watch the recorded Video below.

20231030180801.mp4

  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.