Pier Footing Code Check [EX1-SIG]

After clicking on ‘Substructure Code Checks> Pier Footing Code Check' in the navigation treeview, follow the steps to define the Pier Footing Code Check. You can use the collapsed documentation page below for more information on the explanations of each parameter.

Pier Footing Code Check

Pier Footing Code Check [SIG]

1

Click the three-dots icon on the Template cell, and then set PierFootCCT.

2

As a result of these operations, an issue will appear on the OpenBrIM screen. This does not necessarily mean that any operation was done incorrectly. The issue will be resolved when the shear reinforcement profile in longitudinal direction, shear reinforcement profile in transverse direction and shear reinforcement material are defined in the next step.

3

Quick Tip: Learn how to read issues

When encountering the warning as seen in OpenBrIM app, there is a "issue" , it is advised to review the parameters you have provided. This warning suggests that there might be a missing or incorrect parameter in your input. Check inputs to ensure they are accurate and complete.

When a warning is clicked, the reason can be displayed. The warning is expressed in the format of Component Group Name (can be viewed in the treeview) > User Defined Component Name (can be viewed in the spreadsheet name column) > Parameter Name (can be viewed in the spreadsheet column header).

After clicking on 'Superstructure > Connections > Bolted Field Splice' in the tree view, navigate to the Bolt category. Set the Bolt Property input. The issue will be resolved after these steps.

The screenshot demonstrates one example of two Bolted Field Splice components named BFS1 and BFS2 by the user, with parameter names Flange Bolt Property and Web Bolt Property.

4

Click the three-dots icon on the Select Pier Footing cell, and then set Footing1.

5

Enter the Distance in Longitudinal direction from centroid as 10.

6

Enter the Distance in Transverse direction from centroid as 20.

7

Keep the Check for as default.

8

You can edit the Flexural Reinforcement parameters of Pier Footing Code Check from Flexural Reinforcement tab.

Click the three-dots icon on the Reinforcement Material cell, and then set A615_60.

9

Click three-dots icon on the Longitudinal Direction Reinforcement cell and click Edit.

10

Please set the following values sequentially:

1^st row - Top or Bottom: Bottom Rebar Profile: ASTMA615No8 Spacing of Reinforcement: 10 Distance to Extreme Fiber: 4
2^nd row - Top or Bottom: Top Rebar Profile: ASTMA615No8 Spacing of Reinforcement: 10 Distance to Extreme Fiber: 4

11

Click three-dots icon on the Transverse Direction Reinforcement cell and click Edit.

12

Please set the following values sequentially:

1^st row - Top or Bottom: Bottom Rebar Profile: ASTMA615No8 Spacing of Reinforcement: 10 Distance to Extreme Fiber: 4
2^nd row - Top or Bottom: Top Rebar Profile: ASTMA615No8 Spacing of Reinforcement: 10 Distance to Extreme Fiber: 4

13

You can edit the Shear Reinforcement parameters of Pier Footing Code Check from Shear Reinforcement tab.

Click the three-dots icon on the Shear Reinforcement Profile in Longitudinal direction cell, and then set ASTMA615No5.

14

Click the three-dots icon on the Shear Reinforcement Profile in Transverse direction cell, and then set ASTMA615No5.

15

Click the three-dots icon on the Shear Reinforcement Material cell, and then set A615_60.

16

Keep the Spacing in Longitudinal direction, Spacing in Transverse direction, No. of Legs in Longitudinal direction, No. of Legs in Transverse direction and Shear Reinforcement as default.

17

Set name as PierFootCC.

18

Proceed to the next step to verify the model.

The completed pier footing code check is illustrated below. Please verify that you have the same model on your end by examining each view provided here. For more information on how to perform visual checks, refer to the quick tips.

To view the entire procedure explained on this page, please watch the recorded Video below.

20231031185837.mp4

Pier Footing Code Check [EX1-SIG]

0 Comments