Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

Version 1 Next »

After clicking on ‘Loading> Loads> Inf. Surf Based LL/BR/CE> Live Load Case' in the navigation treeview, follow the steps to define the Live Load Case. You can use the collapsed documentation page below for more information on the explanations of each parameter.

 Live Load Case
Live Load Case [SIG]
1

(blue star) Click the three-dots icon on the Influence Surface cell, and then set ISGravity.

2

(blue star) Keep the Influence Surface 2, Influence Surface 3, Influence Surface 4 and Max for Stress Range as default.

3

(blue star) Click three-dots icon on Multiple Presence Factor and click Edit.

4

(blue star) Please enter the following values sequentially:
1st row - Factor: 1.2
2nd row - Factor: 1
3rd row - Factor: 0.85
4th row - Factor: 0.65

5

(blue star) Keep the Maximum Number of Lanes as default.

6

You can edit the Design Lanes of live load case from Design Lanes tab.

(blue star) Click three-dots icon on Design Lane Option 1 cells and select a Design Lane as HL93TwoTrucksAndLane_LL.

If you have reached this stage and you don't have a design lane to select, and if you want to use the Import Button, you can refer to the Quick Tip.

7

8

Proceed to the next step to verify the model.

  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.