Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 11 Next »

After clicking on 'Properties> Rebars' in the navigation treeview, follow the steps to define the Rebar. You can use the collapsed documentation page below for more information on the explanations of each parameter.

 Rebars
Rebars [SIG]
1

(blue star) Click the three-dots on the first cell of the Name and click Import Rebar Profile

2

(blue star) Import designated rebars below:

  • OpenBrIM Bridge Objects > ASTM Rebar Sizes (Imperial) > ASTM615 > ASTMA615No5

  • OpenBrIM Bridge Objects > ASTM Rebar Sizes (Imperial) > ASTM615 > ASTMA615No6

  • OpenBrIM Bridge Objects > ASTM Rebar Sizes (Imperial) > ASTM615 > ASTMA615No8

  • OpenBrIM Bridge Objects > ASTM Rebar Sizes (Imperial) > ASTM615 > ASTMA615No9

3

Proceed to the next step to verify the model.

The completed rebars are illustrated below. Please verify that you have the same model on your end by examining each view provided here. For more information on how to perform visual checks, refer to the quick tips.

To view the entire procedure explained on this page, please watch the recorded Video below.

20231003161116.mp4

  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.